2:1 AV Block: Second-Degree Block With Every Second P Wave Blocked

Short answer: In 2:1 AV block, P waves are regular and every second P wave is not followed by a QRS, while the PR is constant in the conducted beats. Example: atrial rate 80/min, ventricular rate 40/min, PR 0.18 s every conducted beat. You cannot tell Mobitz I from Mobitz II on this strip, so call it 2:1 AV block.

Try it now: free practice strips

Loading practice…

What 2:1 AV block is

Second-degree AV block means some P waves reach the ventricles and some do not. When exactly every second P wave is blocked, the pattern is called 2:1 AV block (two P waves to one QRS). The atria keep firing regularly from the sinus node, so the P waves march out on time. The ventricles respond to only half of them, so the ventricular rate is half the atrial rate.

The criteria used in the ECG Drills app are:

  • Every second P wave is not conducted (no QRS after it).
  • The PR interval is constant in the conducted beats.
  • The type (Mobitz I or Mobitz II) cannot be decided from this strip.

Why you cannot call it Mobitz I or Mobitz II

The two types of second-degree block are defined by what the PR interval does across consecutive conducted beats before a P wave drops. In Mobitz I (Wenckebach) the PR gets longer beat by beat. In Mobitz II the PR stays the same. Both definitions need at least two conducted beats in a row. In 2:1 block every conducted beat is followed by a blocked P wave, so you never see two conducted beats in a row and the defining feature is invisible. The 2018 ACC/AHA/HRS bradycardia guideline lists 2:1 AV block as its own category for this reason. Full detail on the two types is in Mobitz I vs Mobitz II.

How to identify it: the 5-step method

  1. Rate. Count P waves and QRS complexes separately. The atrial rate is double the ventricular rate.
  2. Rhythm. P-to-P is regular; R-to-R is regular. (If the ratio changes, for example 2:1 then 3:2, the RR becomes irregular.)
  3. P waves. Upright sinus P waves, two for every QRS. One of them often hides in or on the T wave: look for a notch or a peaked T that is taller than the others.
  4. PR. Constant in every conducted beat. If the PR varies at random, think complete heart block instead.
  5. QRS. Narrow or wide. Note it: a wide QRS is one clue that the block may be below the AV node.

Measuring tips are in how to measure PR, QRS and QT.

Worked examples

Example 1. P waves every 3.75 large boxes: 300 ÷ 3.75 = 80/min. QRS every 7.5 large boxes: 300 ÷ 7.5 = 40/min. Every second P has no QRS. PR in conducted beats 4.5 small boxes = 0.18 s each time. QRS 2 small boxes = 0.08 s. Reading: 2:1 AV block, narrow QRS, ventricular rate 40/min.

Example 2. At first glance the strip looks like sinus bradycardia at 45/min. With calipers set to the P-to-P interval, you march out the P waves and find one buried in each T wave, exactly halfway between the visible P waves. Atrial rate 90/min, ventricular rate 45/min. Reading: 2:1 AV block, not sinus bradycardia.

Example 3. Atrial rate 72/min, ventricular rate 36/min, P waves regular, PR 0.16 s in conducted beats, QRS 0.14 s (3.5 small boxes). Reading: 2:1 AV block with a wide QRS. The wide QRS raises concern for block below the AV node; escalate.

Example 4. Atrial rate 80/min, ventricular rate 35/min, PR different in every beat, QRS regular. The PR is not constant and the QRS rate is not exactly half the P rate, so this is not 2:1 block. Reading: third-degree (complete) AV block.

Look-alikes

  • Sinus bradycardia. One P per QRS. In 2:1 block the extra P is often hidden in the T wave.
  • Blocked PACs in bigeminy. An early, differently shaped P wave fails to conduct after every sinus beat. The giveaway is that the blocked P is premature (the P-to-P is not regular). See premature atrial contractions.
  • Complete heart block. PR varies at random; P and QRS have no fixed relationship.
  • Atrial flutter with 2:1 conduction. Sawtooth flutter waves at about 300/min, not separate P waves with a flat baseline. See atrial flutter.

Common mistakes

  • Calling it Mobitz II because the PR is constant. With 2:1 conduction a constant PR proves nothing about type.
  • Missing the hidden P. Always march out the P waves with calipers before calling sinus bradycardia.
  • Counting only QRS complexes. In any AV block, count the atrial and ventricular rates separately.
  • Assuming it is benign. The level of block is unknown; treat it as potentially high-risk until it is clarified.

Clinical significance

Because 2:1 block can arise at the AV node or below it, its risk ranges from low to high and cannot be judged from the strip alone. The slow ventricular rate may cause symptoms. On a monitor, record the atrial and ventricular rates and the QRS width, assess the patient, and escalate according to your institution's policy. Management is outside the scope of this guide.

Practice the decision between 2:1 block, Mobitz I, Mobitz II and complete block in the drill above, or in the full ECG Drills app. See every rhythm in the ECG rhythms list.

Frequently asked questions

What is 2:1 AV block?

A form of second-degree AV block in which two P waves occur for every QRS: one conducts and the next is blocked, over and over. The P waves are regular, the PR interval is constant in every conducted beat, and the ventricular rate is half the atrial rate.

Is 2:1 AV block Mobitz 1 or Mobitz 2?

It cannot be decided from a strip of pure 2:1 conduction. Mobitz I is recognized by the PR lengthening over consecutive conducted beats, and Mobitz II by a constant PR over consecutive conducted beats. In 2:1 block there are never two conducted beats in a row, so neither pattern can be seen. Guidelines treat it as its own category.

How do you tell 2:1 AV block from sinus bradycardia?

Look for the extra P wave. In 2:1 block a second P wave sits between the QRS complexes, often partly hidden in the T wave, and it marches out at exactly half the RR interval. In sinus bradycardia there is only one P wave per QRS. Measure the P-to-P interval with calipers.

Is 2:1 AV block dangerous?

It can be. Because the level of block is unknown, it may be below the AV node, where progression to complete heart block is more likely. The ventricular rate is often slow. Treat it as potentially high-risk: assess the patient for symptoms and perfusion, and escalate according to your institution's policy.

What clues suggest the level of block in 2:1 AV block?

Clues include a wide QRS (favouring block below the AV node) versus a narrow QRS, and a longer strip that shows Wenckebach periods (favouring Mobitz I) or constant-PR drops (favouring Mobitz II). These are clues, not proof; the level of block is often confirmed only with further testing.

References

  1. Kusumoto FM et al. 2018 ACC/AHA/HRS Guideline on the Evaluation and Management of Patients With Bradycardia and Cardiac Conduction Delay. Circulation. 2019;140:e382–e482
  2. StatPearls: Second-Degree Atrioventricular Block (NBK482359)
  3. StatPearls: Atrioventricular Block (NBK459147)
  4. LITFL ECG Library

Teaching criteria; textbooks differ on some cut-offs. Educational practice only: not a clinical decision tool. Always assess the patient and follow your institution's policies.