First Degree AV Block ECG

Short answer: First-degree AV block is sinus rhythm with a PR interval longer than 0.20 seconds (more than 5 small boxes) that stays the same every beat, and every P wave is followed by a QRS. Example: PR 7 small boxes × 0.04 s = 0.28 s, rate 70/min, no dropped beats. It is a delay, not a block.

Try it now: free practice strips

Loading practice…

What first-degree AV block is

First-degree atrioventricular (AV) block is a delay in conduction between the atria and the ventricles, usually in the AV node. Every sinus impulse still gets through, so every P wave is followed by a QRS. It just takes longer than normal, which shows up on the strip as a long PR interval.

The name is misleading: nothing is actually blocked. That is why it is easy to miss. The rate, rhythm and QRS can all be normal, and the strip looks like normal sinus rhythm until you measure the PR. It is also the one AV block you can only find with a caliper or by counting boxes.

Criteria

FeatureFirst-degree AV block
RateUsually the underlying sinus rate (any; often 60–100)
RhythmRegular
P wavesUpright sinus P before every QRS
PR interval> 0.20 s (> 5 small boxes) and the same every beat
Conduction1:1, every P conducted, no dropped beats
QRSUsually narrow (< 0.12 s)

Grid reminder at 25 mm/s: one small box is 0.04 s; one large box is 0.20 s. A PR that spans more than one large box is prolonged.

How to identify it: the 5-step method

  1. Rate. QRS in 6 seconds × 10, or 1500 ÷ small boxes between R waves.
  2. Rhythm. Regular. If the RR has a repeating group with a pause, think second-degree block.
  3. P waves. One upright P before every QRS. March the P waves across the strip to be sure none are dropped. Check the T waves for a hidden P.
  4. PR interval. The deciding step. Measure from the start of the P to the start of the QRS on at least three beats. Over 0.20 s and constant = first-degree block.
  5. QRS. Usually narrow; a wide QRS with a long PR suggests additional conduction disease.

The method in full: how to read a rhythm strip.

Worked examples

Example 1. 7 QRS in 6 s → 70/min, regular. Upright P before every QRS. PR 7 small boxes × 0.04 = 0.28 s on every beat. QRS 0.08 s. Sinus rhythm with first-degree AV block.

Example 2. 8 QRS in 6 s → 80/min. PR 5 small boxes = 0.20 s. That is the upper limit of normal, not first-degree block, because the definition is longer than 0.20 s. Normal sinus rhythm.

Example 3. PR measures 0.24 s, 0.32 s, 0.36 s, then a P wave with no QRS, then 0.24 s again. The PR is not constant and a beat is dropped. This is second-degree AV block, Mobitz I (Wenckebach), not first-degree block.

Example 4. 5 QRS in 6 s → 50/min, regular, upright P before each QRS, PR 0.26 s constant. Sinus bradycardia with first-degree AV block: name both.

Look-alikes and how to tell them apart

RhythmKey difference from first-degree block
Normal sinus rhythmPR 0.12–0.20 s. Same everything else, so measure.
Mobitz I (Wenckebach)PR lengthens progressively, then a P is not conducted; grouped beating.
Mobitz IIPR constant (may be normal or long) but a P is suddenly dropped.
Third-degree (complete) blockPR varies randomly; P and QRS are independent.
Sinus bradycardiaA rate description; the PR is normal. Both can coexist.

Why the PR matters on a monitor

On telemetry the rate alarm will not catch first-degree block, because the rate is usually normal. Measuring and documenting the PR on each strip you mount gives a baseline. If the PR lengthens over a shift, or a dropped P appears, the comparison makes the change obvious. Use the same beat position and the same method each time so measurements are comparable.

Common mistakes

  • Calling it normal sinus rhythm. The ECG Drills feedback: measure the PR. If it is longer than 0.20 s, that is first-degree AV block.
  • Measuring to the end of the QRS. The PR runs from the start of the P wave to the start of the QRS.
  • Counting small boxes as 0.20 s. Small box 0.04 s; large box 0.20 s. Mixing them makes intervals five times too long.
  • Calling Wenckebach first-degree block. If at least one P wave is not followed by a QRS, it is second-degree block.
  • Measuring only one beat. Check several PRs; a changing PR changes the diagnosis.

Clinical significance (one line)

First-degree AV block is usually benign, but it is worth watching on later strips for progression to higher-degree block.

Practice it

The drill above mixes first-degree block with normal sinus rhythm, Mobitz I and sinus bradycardia, so you have to measure the PR to get it right. More strips are in the ECG Drills app; the ECG Drills home page lists every rhythm.

Frequently asked questions

What PR interval is first-degree heart block?

A PR interval longer than 0.20 seconds (200 ms), which is more than one large box or 5 small boxes at 25 mm/s. The PR must be the same on every beat and every P wave must be followed by a QRS. A PR over 0.30 s is sometimes called marked first-degree block.

Is first-degree AV block dangerous?

It is usually benign and causes no symptoms. It can be normal in athletes or caused by medications that slow AV conduction. It becomes more important if the PR is very long, if it is new, or if it appears alongside other conduction problems, so it is worth watching for progression on later strips.

What is the difference between first-degree block and Mobitz I?

In first-degree block the PR is long but constant and every P conducts. In Mobitz I (Wenckebach) the PR gets longer beat by beat until a P wave is not followed by a QRS, then it resets. If any P wave is dropped, it is at least second-degree block.

How do you measure the PR interval?

Measure from the start of the P wave to the start of the QRS complex, whether that is a Q wave or an R wave. Count small boxes and multiply by 0.04 s. A common error is measuring to the end of the QRS, which adds the QRS duration and overestimates the PR.

Can the P wave hide in first-degree AV block?

Yes. With a long PR and a fast rate, the P wave can sit on or inside the previous T wave. The strip can then look like a junctional rhythm or a rhythm with no P waves. Look for a notch or bump in the T wave, and compare T waves with each other.

References

  1. LITFL ECG Library: First Degree Heart Block
  2. Kusumoto FM, et al. 2018 ACC/AHA/HRS Guideline on the Evaluation and Management of Patients With Bradycardia and Cardiac Conduction Delay. Circulation. 2019;140:e382–e482
  3. StatPearls: First-Degree Heart Block (NCBI Bookshelf NBK448164)
  4. StatPearls: Atrioventricular Block (NCBI Bookshelf NBK459147)

Teaching criteria; textbooks differ on some cut-offs. Educational practice only: not a clinical decision tool. Always assess the patient and follow your institution's policies.