How to Calculate Heart Rate on an ECG

Short answer: Count the QRS complexes in a 6-second strip and multiply by 10; this works for any rhythm. For a regular rhythm, divide 300 by the large boxes between two R waves, or 1500 by the small boxes. Example: RR of 4 large boxes (20 small) gives 300 ÷ 4 = 1500 ÷ 20 = 75/min.

Try it now: free practice strips

Loading practice…

Why rate comes first

Rate is step one of the 5-step rhythm strip method because it narrows the list straight away: slow, normal or fast. On an ECG or EKG strip at the standard paper speed of 25 mm/s, the grid does the timing for you. One small box (1 mm) is 0.04 s, one large box (5 mm) is 0.20 s, five large boxes are 1 second and thirty large boxes are 6 seconds. There are three hand methods, and each one has a situation where it is the right tool and a situation where it gives the wrong answer.

The three methods at a glance

MethodFormulaUse forFails when
6-secondQRS in 6 s × 10Any rhythm, especially irregularRate is slow (each beat changes the answer by 10); strip is not really 6 s
300 (large box)300 ÷ large boxes in one RRQuick estimate, regular rhythmRhythm is irregular; R wave falls between lines
1500 (small box)1500 ÷ small boxes in one RRPrecise rate, regular rhythmRhythm is irregular

All three assume 25 mm/s. At 50 mm/s the boxes are worth half as much time, so the 300 and 1500 numbers become 600 and 3000.

The 6-second method

  1. Find 6 seconds on the strip: 30 large boxes, or two 3-second tick marks apart.
  2. Count the QRS complexes inside that window. Count only QRS complexes, not P waves, and count complexes that start inside the 6 seconds.
  3. Multiply by 10.

Worked example (atrial fibrillation): an irregularly irregular strip has 11 QRS complexes in 6 s. Rate = 11 × 10 = 110/min. If you had timed one short RR of 10 small boxes you would have said 150; one long RR of 20 small boxes would have said 75. Neither is the rate.

The method is robust but coarse: each extra or missed complex moves the answer by 10. At slow rates that matters. For a slow, regular rhythm, check the answer with the 1500 method; for a slow irregular rhythm, count over a longer strip.

The 300 method

  1. Find an R wave that sits on (or close to) a thick line.
  2. Count the large boxes to the next R wave.
  3. Divide 300 by that number. Memorize the sequence 300, 150, 100, 75, 60, 50 for 1 to 6 large boxes.

Worked example: a regular rhythm with 4 large boxes between R waves → 300 ÷ 4 = 75/min. If the next R falls between 3 and 4 boxes, the rate is between 100 and 75: an estimate, which is all this method gives.

The 1500 method

  1. Confirm the rhythm is regular (RR intervals the same across the strip).
  2. Count the small boxes between two consecutive R waves.
  3. Divide 1500 by that number.

Worked example (sinus bradycardia): RR = 30 small boxes (1.20 s) → 1500 ÷ 30 = 50/min. A 6-second count on the same strip finds 5 QRS → 50/min, so the two methods agree.

Worked example (sinus tachycardia): RR = 12 small boxes (0.48 s) → 1500 ÷ 12 = 125/min. Partial boxes count: an RR of 18 small boxes gives 1500 ÷ 18 = 83.3, rounded to 83/min.

Choosing the method: step by step

  1. Is the rhythm regular? March out the RR intervals. If they vary (AF, frequent ectopics, Mobitz I, sinus arrhythmia), use the 6-second method.
  2. If regular, do you need precision? Use 1500. For a quick look, use 300.
  3. Atria and ventricles at different rates? In AV block or atrial flutter, the "heart rate" is the ventricular (QRS) rate. Work out the atrial rate separately from the P–P or F–F interval when you need it. For example, in complete heart block P waves every 15 small boxes give an atrial rate of 100 while QRS complexes every 37–38 small boxes give a ventricular rate of about 40.
  4. Sanity check. Compare your answer with the band: under 60 slow, 60–100 normal, over 100 fast. A wild mismatch usually means the wrong multiplier or the wrong waves were counted.

Look-alikes: when two methods disagree

If the 6-second count and the 1500 method give different answers on the same strip, the rhythm is probably not as regular as it looked. Sinus arrhythmia, frequent PACs or PVCs, and Mobitz I all change the RR from beat to beat, so the single interval you timed may be one of the short or long ones. Trust the count over the whole window. The reverse also happens: on a slow regular strip with 4 QRS complexes in 6 seconds the count says 40, but if a fifth complex starts just outside the window the true rate may be nearer 45, which the 1500 method on one RR interval will show. A 10-second strip (count × 6) narrows the error further. When the monitor number and your hand count disagree, check the leads and the patient before trusting either; artifact and tall T waves can be double-counted by the machine.

Common mistakes

  • Counting P (or flutter) waves instead of QRS. The monitor rate is the ventricular rate. In 2:1 block or flutter, counting P or F waves can double the answer.
  • Using one RR interval on an irregular rhythm. One interval does not represent the rate. Count QRS × 10.
  • Multiplying by 6 instead of 10. A 6-second strip is one tenth of a minute.
  • Counting large boxes on a 1500 question (or small boxes on a 300 question). Check which divisor matches the box size.
  • Forgetting paper speed. The numbers assume 25 mm/s.

Why it matters

A rate outside the normal band is a prompt to look at the patient and the rest of the strip, not a diagnosis on its own; see sinus bradycardia for how sources differ on where "slow" starts. Practice all three methods with instant feedback in the ECG Drills app, or browse the cheat sheet on the ECG Drills home page.

Frequently asked questions

What is the most accurate way to calculate heart rate on an ECG?

For a regular rhythm, the 1500 method (1500 ÷ small boxes between two R waves) is the most precise by hand, because it uses the smallest unit on the grid. For an irregular rhythm, use the 6-second method (QRS count × 10) or count over a longer strip, because any single RR interval misrepresents an irregular rate.

Why do you multiply by 10 in the 6-second method?

Six seconds is one tenth of a minute, so the number of QRS complexes in 6 seconds multiplied by 10 gives beats per minute. A common slip is multiplying by 6. On a 10-second strip (the standard 12-lead length), multiply the count by 6 instead.

Why 300 and 1500?

At 25 mm/s the paper moves 300 large boxes (1500 small boxes) per minute. Dividing that by the number of boxes in one RR interval gives how many such intervals, and so how many beats, fit into a minute. The numbers only hold at 25 mm/s.

How do you calculate heart rate in atrial fibrillation?

Use the 6-second method: count every QRS complex that falls inside 6 seconds and multiply by 10. The RR intervals in AF vary, so the 300 and 1500 methods give a different answer depending on which pair of beats you pick. A longer count gives a more stable estimate.

Do you count P waves or QRS complexes?

Count QRS complexes. The heart rate is the ventricular rate. In heart block or atrial flutter the atrial rate (P or flutter waves) can be much faster than the ventricular rate, and counting P waves overstates the rate. You can calculate the atrial rate separately when the question asks for it.

References

  1. LITFL ECG Library: ECG Rhythm Evaluation
  2. StatPearls: Electrocardiogram (NBK549803)
  3. Kligfield P et al. Recommendations for the Standardization and Interpretation of the Electrocardiogram, Part I. Circulation. 2007;115:1306–1324
  4. Kusumoto FM et al. 2018 ACC/AHA/HRS Guideline on Bradycardia and Cardiac Conduction Delay. Circulation. 2019;140:e382–e482

Teaching criteria; textbooks differ on some cut-offs. Educational practice only: not a clinical decision tool. Always assess the patient and follow your institution's policies.