Free learning calculators

QTc Calculator (Bazett and Fridericia)

Quick answer: QTc corrects the QT interval for heart rate. Bazett: QTc = QT ÷ √RR; Fridericia: QTc = QT ÷ ∛RR, with RR in seconds. For QT 400 ms and RR 800 ms (75 bpm): Bazett gives 447 ms and Fridericia gives 431 ms. At 60 bpm (RR 1 second) both equal the measured QT.

Learning aid: check your practice answers. Not for clinical decisions.

QTc (Bazett)
447 ms
QTc (Fridericia)
431 ms
Heart rate
75 bpm

Formula

  • Bazett: QTc = QT ÷ √RR (RR in seconds)
  • Fridericia: QTc = QT ÷ ∛RR (RR in seconds)

Step-by-step working

  1. RR in seconds = 800 ÷ 1000 = 0.8 s (heart rate = 60,000 ÷ 800 = 75 bpm).
  2. Bazett: √0.8 = 0.8944; QTc = 400 ÷ 0.8944 = 447 ms.
  3. Fridericia: ∛0.8 = 0.9283; QTc = 400 ÷ 0.9283 = 431 ms.

At 60 bpm (RR 1,000 ms) both formulas give QTc = QT.

Why the QT needs correcting

The QT interval shortens as the heart rate rises, so a raw QT cannot be compared between rates. Correction formulas estimate what the QT would be at 60 bpm (an RR interval of 1 second). This calculator shows the two formulas used in the ECG Drills app, Bazett and Fridericia, computed with the same exact-decimal function and rounded to the nearest millisecond.

Bazett divides by the square root of RR and is the most widely taught. Fridericia divides by the cube root and is preferred by many cardiologists because Bazett over-corrects at fast heart rates and under-corrects at slow ones. Other formulas exist (for example Framingham and Hodges, which are linear); they are not part of the ECG Drills content set, so they are not shown here.

Worked example

Strip: QT 400 ms, RR 800 ms (heart rate 60,000 ÷ 800 = 75 bpm).

  1. RR in seconds = 0.8 s.
  2. Bazett: √0.8 = 0.8944; 400 ÷ 0.8944 = 447.2 → 447 ms.
  3. Fridericia: ∛0.8 = 0.9283; 400 ÷ 0.9283 = 430.9 → 431 ms.

To get the RR from a strip, count small boxes between two R waves and multiply by 40 ms (at 25 mm/s), or use RR (ms) = 60,000 ÷ heart rate.

Interpreting the result

The AHA/ACCF/HRS recommendations describe a prolonged QTc as 450 ms or more in men and 460 ms or more in women, and a short QTc as 390 ms or less. A QTc above 500 ms is widely taught as a marker of high risk for torsades de pointes. Check the cut-offs your course uses.

Why QTc matters

A prolonged QT interval reflects delayed ventricular repolarisation and increases the risk of torsades de pointes, a polymorphic ventricular tachycardia that can degenerate into ventricular fibrillation. Many common drugs prolong the QT, including some antiarrhythmics, antipsychotics, antiemetics and antibiotics, as do low potassium and low magnesium. That is why nurses and students are expected to measure the QT, correct it for rate, and compare it with a baseline. Because the correction depends on the RR interval, irregular rhythms such as atrial fibrillation make any single QTc estimate less reliable.

Common mistakes

Frequently asked questions

What is the Bazett formula?

QTc = QT ÷ √RR, with RR in seconds. For QT 400 ms and RR 0.8 s, QTc = 400 ÷ 0.8944 = 447 ms.

What is the Fridericia formula?

QTc = QT ÷ ∛RR, with RR in seconds. It corrects less aggressively than Bazett at fast heart rates.

What is a normal QTc?

AHA/ACCF/HRS recommendations treat a QTc of 450 ms or more in men and 460 ms or more in women as prolonged, and 390 ms or less as short.

Why do Bazett and Fridericia give different answers?

They use different powers of RR (square root versus cube root). They agree at 60 bpm and diverge as the rate moves away from 60.

References

  1. Rautaharju PM, Surawicz B, Gettes LS, et al. AHA/ACCF/HRS recommendations for the standardization and interpretation of the electrocardiogram: Part IV: the ST segment, T and U waves, and the QT interval. J Am Coll Cardiol. 2009;53(11):982-991. doi:10.1016/j.jacc.2008.12.014
  2. Clinical Drills content packages (founder-reviewed formula sets; the calculators call the same functions the practice apps grade with).

Educational practice only. This calculator is a learning aid for checking practice answers. It is not clinical decision support and must not be used for patient care. Always follow your institution's policies, current drug references and the prescriber's order.