Pharmacy Sig Codes and Error-Prone Abbreviations

Quick answer: Sig codes are the abbreviations in a prescription's directions. The frequency codes set the doses per day: daily = 1, BID = 2, TID = 3, QID = 4, q6h = 4, q8h = 3, q12h = 2. For PRN sigs, count the maximum. ISMP lists QD, QOD, U and cc as error-prone: write daily, every other day, units, mL.

Decode a sig now (free sample)

0 correct in a row

Free sample problem

Loading a problem…

    Want every problem type, timed exams and mistake drills? Open the practice app.

    Educational practice only. Not dispensing guidance.

    How to read a sig

    A sig has the same parts in almost the same order every time: verb (take, inject, instill), how many (1 tab, 2 puffs, 10 units), route (PO, SUBQ, in the right eye), how often (BID, q8h) and, for as-needed medicines, why (PRN pain). Translate each part into plain words, then do the arithmetic: units per dose × doses per day gives the units per day, the number behind quantity to dispense and days' supply.

    Example: "1 tab PO TID PRN muscle spasm" becomes "Take 1 tablet by mouth up to three times a day as needed for muscle spasm", which is at most 3 tablets a day. Ten days of that is up to 30 tablets.

    Frequency codes and doses per day

    CodeMeaningDoses in 24 hours
    dailyonce a day (write "daily", not QD)1
    BIDtwice a day2
    TIDthree times a day3
    QIDfour times a day4
    q4hevery 4 hours6
    q6hevery 6 hours4
    q8hevery 8 hours3
    q12hevery 12 hours2
    every other dayone dose every 2 days (write it out, not QOD)½ a day on average

    For any "every N hours" code, doses per day = 24 ÷ N. That is why q6h is 4 doses, not 6, and q4h is 6 doses. TID and q8h both give 3 doses, but TID is usually spread over waking hours, while q8h is around the clock; the count is the same for quantity and days' supply.

    Route, form and other common abbreviations

    AbbreviationMeaning
    POby mouth
    SLunder the tongue (sublingual)
    SUBQsubcutaneous (ISMP's recommended form; avoid SC, SQ, sub q)
    IM / IVintramuscular / intravenous
    PRrectally
    PRNas needed
    AC / PCbefore meals / after meals
    tab, cap, gtttablet, capsule, drop

    ISMP error-prone abbreviations: what to write instead

    The ISMP List of Error-Prone Abbreviations, Symbols, and Dose Designations (2024) collects abbreviations that were reported through the ISMP medication error reporting program and were misread in harmful or potentially harmful errors. ISMP says they should not be used in any medication communication, including prescriptions, labels and pharmacy computer screens. Items marked ** in the list are also on The Joint Commission's "Do Not Use" list. The ones pharmacy technicians meet most often:

    AvoidIntendedMisread asWrite instead
    QD, q.d. **every dayq.i.d. (four times a day)daily
    QOD, q.o.d. **every other daydaily or four times a dayevery other day
    o.d. or OD (frequency)once dailyright eyedaily
    U or u **units0, 4 or cc (10-fold or greater overdose)units
    IU **international unitsIV or the number 10units
    cccubic centimetersu (units)mL
    µgmicrogrammgmcg
    SC, SQ, sub qsubcutaneousSL; "5 every"SUBQ or subcutaneous
    AD, AS, AU / OD, OS, OUears / eyeseach otherright ear, left eye, etc. in words
    TIW, BIW3 or 2 times a week3 or 2 times a day3 times weekly, 2 times weekly
    D/Cdischarge or discontinuethe other meaningdischarge, discontinue
    UDas directedunit doseas directed
    1.0 mg (trailing zero) **1 mg10 mg1 mg
    .5 mg (no leading zero) **0.5 mg5 mg0.5 mg

    Two points from the 2024 list surprise people. First, Qhs (and Qn) are listed because they were misread as "every hour", and ISMP's recommended form for bedtime is now QHS or qhs. Second, ISMP also flags "½ tablet" written as a fraction and Roman-numeral doses; write "half tablet" and use Arabic numerals.

    What a technician does with an error-prone sig

    Learning to decode QOD is still worth it, because it shows up on old prescriptions and in exam questions. In the pharmacy, a technician does not reinterpret an ambiguous abbreviation. The prescription goes to the pharmacist, who clarifies it with the prescriber when needed, and the patient label is written in plain words ("every other day"). That is why the practice app shows QOD only as a flagged teaching item.

    From sig to quantity and days' supply

    Once you know units per day, the next two calculations follow directly: quantity = units per day × days, and days' supply = quantity ÷ units per day. Both are covered step by step in how to calculate days' supply. For how the exams test this, see PTCE math and PTCE vs ExCPT.

    Worked examples

    These examples come from the practice app's sig-decoding template. The numbers are generated at build time from the same code that marks your answers.

    Example 1

    Patient: Adult.

    Rx: cyclobenzaprine 10 mg tablets. Sig: 1 tab PO TID PRN muscle spasm.

    • On hand: cyclobenzaprine 10 mg, tablet.
    • Practice prescription for Test Patient. Educational practice only.

    What is the maximum number of tablets the patient may take per day?

    1. TID = three times a day: 3 doses per day at most (PRN: count the maximum allowed).
    2. 1 tablet per dose × 3 doses = 3 tablets
    3. = 3 tablets per day

    Answer: 3 tablets

    Example 2

    Patient: Adult.

    Rx: promethazine 25 mg tablets. Sig: 1 tab PO q6h PRN nausea.

    • On hand: promethazine 25 mg, tablet.
    • Practice prescription for Test Patient. Educational practice only.

    What is the maximum number of tablets the patient may take per day?

    1. q6h = every 6 hours: 4 doses per day at most (PRN: count the maximum allowed).
    2. 1 tablet per dose × 4 doses = 4 tablets
    3. = 4 tablets per day

    Answer: 4 tablets

    Example 3

    Patient: Adult.

    Rx: prednisone 20 mg tablets. Sig: 2 tabs PO QOD.

    • On hand: prednisone 20 mg, tablet.
    • Practice prescription for Test Patient. Educational practice only.
    • Teaching item: QOD is on ISMP's List of Error-Prone Abbreviations. In practice the pharmacist clarifies it with the prescriber.

    How many tablets will the patient take in 14 days?

    1. QOD = every other day (error-prone: real pharmacies clarify it with the prescriber). In 14 days that is 14 ÷ 2 = 7 doses.
    2. 7 doses × 2 tablets per dose
    3. = 14 tablets

    Answer: 14 tablets

    Common mistakes (and the wrong answers they produce)

    Each mistake is shown with the wrong answer it produces in the worked examples above.

    Mixed up BID and TID

    Wrong answer it gives: 2 tablets. BID is twice a day; TID is three times. Correct: 3 tablets per day.

    Did not use the maximum PRN doses

    Wrong answer it gives: 1 tablets. For PRN orders, quantity is based on the maximum allowed doses, 3 tablets/day.

    Counted q6h as 6 doses a day

    Wrong answer it gives: 6 tablets. q6h means every 6 hours: 24 ÷ 6 = 4 doses a day (6 doses a day would be q4h). Correct: 4 tablets per day.

    Read QOD as daily

    Wrong answer it gives: 28 tablets. QOD means every other day. You treated it as daily. (QOD is on ISMP's error-prone list; real pharmacies clarify it.) Correct: 14 tablets. Why this matters at the counter: read as daily, the patient takes twice the intended dose.

    Counted doses, not units

    Wrong answer it gives: 7 tablets. Each dose is 2 tablets. Multiply by 2. Correct: 14.

    Frequently asked questions

    What does a sig code mean on a prescription?

    The sig (from the Latin signa, "write" or "label") is the prescriber's directions for use. Sig codes are the abbreviations in it, such as PO (by mouth), BID (twice a day) and PRN (as needed). The pharmacy translates them into plain-language label directions.

    What is the difference between QID and q6h?

    QID means four times a day, usually while awake. q6h means every 6 hours around the clock. Both give at most 4 doses in 24 hours, but the timing is different, and a common mistake is to count q6h as 6 doses a day.

    Which sig abbreviations should not be used?

    ISMP lists abbreviations that have caused harmful errors, including QD, QOD, U, IU, cc, SC/SQ, AD/AS/AU, OD/OS/OU used for eyes or once daily, and trailing zeros or missing leading zeros. Those also on The Joint Commission's Do Not Use list (such as QD, QOD, U, IU, a trailing zero and a missing leading zero) must be on an organization's own Do Not Use list.

    How do I count tablets per day for a PRN sig?

    Use the maximum the sig allows. "1 tab q6h PRN pain" allows a dose every 6 hours, so at most 4 tablets a day. Quantity and days' supply are based on that maximum.

    Does ISMP still say not to use QHS?

    Not in the 2024 list. ISMP now lists Qhs (capital Q, lowercase hs) and Qn as error-prone and recommends writing QHS or qhs for bedtime. HS on its own is not on the 2024 list; on patient labels, writing "at bedtime" in words is still clearest.

    Are sig codes on the PTCE and ExCPT?

    Yes. The PTCE content outline (effective January 6, 2026) names Sig codes such as b.i.d. and t.i.d. under Order Entry and Processing (22.50% of the exam). The ExCPT test plan covers prescription intake and entry, including abbreviations.

    References

    1. ISMP. List of Error-Prone Abbreviations, Symbols, and Dose Designations (2024, PDF), accessed 2026-11-17
    2. PTCB. PTCE Content Outline, effective January 6, 2026 (PDF), accessed 2026-11-17
    3. NHA. Test Plan for the ExCPT Exam, based on a 2023 job analysis (PDF), accessed 2026-11-17

    PTCB, PTCE and CPhT are trademarks of the Pharmacy Technician Certification Board; NHA and ExCPT are trademarks of the National Healthcareer Association. Not affiliated with or endorsed by either. Course conventions vary: use the rules your program teaches.

    Educational practice only. Not dispensing guidance: always follow your pharmacy's policies, the pharmacist's direction and the product labeling.