Dilution Calculations (C1V1 = C2V2)

Quick answer: Use C1 × V1 = C2 × V2: stock strength × stock volume = final strength × final volume. To make 500 mL of 5% from 50% stock: V1 = 5 × 500 ÷ 50 = 50 mL of stock. Diluent to add = final volume − stock volume = 500 − 50 = 450 mL.

Practice dilutions now (free sample)

0 correct in a row

Free sample problem

Loading a problem…

    Want every problem type, timed exams and mistake drills? Open the practice app.

    Educational practice only. Not dispensing guidance.

    What C1V1 = C2V2 means

    When you dilute a stock solution, you add a liquid (or base) that contains no drug. The amount of drug does not change; it is just spread through a bigger volume. Concentration × volume gives the amount of drug, so the amount before (C1 × V1) equals the amount after (C2 × V2).

    • C1: concentration of the stock you start with (the stronger one).
    • V1: volume (or weight) of stock you use.
    • C2: concentration you want to make (the weaker one).
    • V2: total volume (or weight) of the finished product.

    Three of the four values are always given; you solve for the fourth. The units on both sides must match: if C1 is a percent, C2 must be a percent; if V2 is in mL, V1 comes out in mL. For creams and ointments, use grams in place of milliliters.

    The three question types

    1. How much stock do you need?

    Rearrange to V1 = C2 × V2 ÷ C1. Multiply the strength you want by the amount you want, then divide by the stock strength.

    2. How much diluent do you add?

    Find V1 first, then subtract: diluent = V2 − V1. This is the step most often skipped: the question asks how much water or base to add, and the stock volume is only half the answer. In practice problems, assume the volumes add up exactly unless told otherwise.

    3. What is the final strength?

    Rearrange to C2 = C1 × V1 ÷ V2. The answer must be weaker than the stock; if it is not, a number is in the wrong place.

    Set it up the same way every time

    1. Write down C1, V1, C2 and V2, and mark the unknown.
    2. Check that the strengths are in the same units (both % or both mg/mL) and the amounts are in the same units (both mL or both g).
    3. Solve for the unknown and round only at the end, to what you can measure.
    4. Sanity-check: the stronger solution gets the smaller volume, and the final strength is between zero and the stock strength.

    Many students prefer dimensional analysis for the same problem: 500 mL × (5% ÷ 50%) = 50 mL of stock. The percent units cancel and leave mL. Both methods give the same answer; the practice app lets you choose which method its worked solutions use.

    Percent strength refresher

    Dilution questions are usually written in percent. Percent weight-in-volume (% w/v) means grams per 100 mL, so a 5% w/v solution has 5 g in every 100 mL. Percent weight-in-weight (% w/w), used for creams and ointments, means grams per 100 g. You don't need to convert percent to grams to use C1V1 = C2V2, as long as both strengths are in the same form, but it is a good check that your answer makes sense.

    High-alert dilutions

    Some dilutions in hospital pharmacy involve high-alert medications, such as concentrated sodium chloride and dextrose 20% or stronger, which are on ISMP's high-alert lists. In real practice these preparations follow the pharmacy's sterile compounding procedures and are checked by a pharmacist. The practice problems flag these products and include that context, because a mistake in the setup is a patient-safety issue, not just a lost exam point.

    When the two ingredients both contain drug (for example, mixing a 70% and a 10% solution), C1V1 = C2V2 doesn't apply directly: use alligation. For the conversions that often come before a dilution, see the conversions guide.

    Worked examples

    These examples come from the same dilution template as the practice app (Dakin's solution, a compounded cream, dextrose and concentrated sodium chloride). The numbers are generated at build time, so they match the app exactly.

    Example 1

    Prepare 500 mL of sodium hypochlorite (Dakin's solution) 0.125% from 0.5% stock.

    • On hand: sodium hypochlorite (Dakin's solution) 0.5% (w/v), stock solution.
    • On hand: sterile water diluent (no drug), solution.
    • A wound-care order asks for a weaker Dakin's solution than the full-strength bottle on the shelf.
    • Assume volumes (or weights) add up exactly.

    How many mL of the 0.5% stock do you need?

    1. C1V1 = C2V2: 0.5% × V1 = 0.125% × 500 mL.
    2. V1 = 0.125 × 500 ÷ 0.5
    3. = 125 mL

    Answer: 125 mL

    Example 2

    Prepare 250 mL of sodium hypochlorite (Dakin's solution) 0.25% from 0.5% stock.

    • On hand: sodium hypochlorite (Dakin's solution) 0.5% (w/v), stock solution.
    • On hand: sterile water diluent (no drug), solution.
    • A wound-care order asks for a weaker Dakin's solution than the full-strength bottle on the shelf.
    • Assume volumes (or weights) add up exactly.

    How many mL of sterile water do you add?

    1. C1V1 = C2V2: 0.5% × V1 = 0.25% × 250 mL.
    2. V1 = 0.25 × 250 ÷ 0.5
    3. V1 = 125 mL of 0.5% stock.
    4. Diluent = V2 − V1 = 250 − 125
    5. = 125 mL

    Answer: 125 mL

    Example 3

    Prepare 60 g of triamcinolone acetonide cream 0.05% (w/w) from 0.1% stock.

    • On hand: triamcinolone acetonide cream 0.1% (w/w), cream (stock).
    • On hand: a compatible cream base diluent (no drug), base.
    • A prescription asks for triamcinolone cream diluted in a cream base (a common compounded strength).
    • Assume volumes (or weights) add up exactly.

    How many g of the 0.1% stock do you need?

    1. C1V1 = C2V2: 0.1% × V1 = 0.05% × 60 g.
    2. V1 = 0.05 × 60 ÷ 0.1
    3. = 30 g

    Answer: 30 g

    Example 4

    5 mL of dextrose 50% is brought to a final volume of 10 mL with sterile water for injection.

    • On hand: dextrose 50% (w/v), stock solution (HIGH-ALERT).
    • On hand: sterile water for injection diluent (no drug), solution.
    • A pediatric hypoglycemia order calls for dextrose 25% (D25). When D25 is unavailable, it is prepared from D50 in the pharmacy.
    • Dextrose 20% or stronger is on the ISMP high-alert list; a pharmacist checks every preparation.
    • Assume volumes (or weights) add up exactly.

    What is the final strength, in percent?

    1. C1V1 = C2V2: 50% × 5 mL = C2 × 10 mL.
    2. C2 = 50 × 5 ÷ 10 = 25%.
    3. Check: 25% is weaker than the 50% stock.

    Answer: 25 %

    Example 5

    Prepare 500 mL of sodium chloride 3% from 23.4% stock.

    • On hand: sodium chloride 23.4% (w/v), stock solution (HIGH-ALERT).
    • On hand: sterile water for injection diluent (no drug), solution.
    • Commercial 3% sodium chloride bags are on shortage. Under the pharmacy's sterile-compounding procedure, 3% is prepared from 23.4% concentrate.
    • Concentrated sodium chloride 23.4% is an ISMP high-alert medication: it must be diluted before use and is never given undiluted. Pharmacies store it apart from other vials. Every 3% preparation is independently double-checked by a pharmacist.
    • Assume volumes (or weights) add up exactly.

    How many mL of the 23.4% stock do you need?

    1. C1V1 = C2V2: 23.4% × V1 = 3% × 500 mL.
    2. V1 = 3 × 500 ÷ 23.4
    3. = 64.1026 mL → rounded to 64.1 mL

    Answer: 64.1 mL

    Common mistakes (and the wrong answers they produce)

    These are the mistakes the practice app recognizes. Each one is shown with the wrong answer it would give in the worked examples above, and the feedback you would see.

    Gave the diluent volume, not the stock

    Wrong answer it gives: 375 mL. The question asks for the stock volume (V1 = C2 × V2 ÷ C1 = 125 mL), not the diluent.

    Swapped C1 and C2

    Wrong answer it gives: 2,000 mL. The stronger solution gets the smaller volume. You swapped C1 and C2.

    Final strength came out stronger than the stock

    Wrong answer it gives: 100 %. A diluted solution can't be stronger than its stock. Check which concentration is which.

    Frequently asked questions

    What is the C1V1 = C2V2 formula?

    It is the dilution formula. C1 and V1 are the concentration and volume of the stock you start with; C2 and V2 are the concentration and volume you want to end up with. The amount of drug is the same before and after dilution, so C1 × V1 = C2 × V2.

    How do you calculate how much diluent to add?

    First find V1, the volume of stock you need (V1 = C2 × V2 ÷ C1). Then subtract it from the final volume: diluent = V2 − V1. For example, 50 mL of 50% stock brought to 500 mL needs 450 mL of diluent.

    Which concentration is C1?

    C1 is always the stronger stock you start with. C2 is the weaker strength you want. If your answer says you need more stock than the final volume, you have swapped C1 and C2.

    Can a dilution make a solution stronger?

    No. Adding diluent can only lower the concentration. If your calculated final strength is higher than the stock, recheck which numbers go where.

    Does C1V1 = C2V2 work for creams and ointments?

    Yes, as long as both strengths are in the same terms (for example % w/w) and the base contains no drug. Use grams for V1 and V2 instead of milliliters.

    Is C1V1 = C2V2 the same as alligation?

    They are related. C1V1 = C2V2 is the special case where one of the two ingredients has no drug (a diluent or plain base). When you mix two strengths that both contain drug, use alligation.

    Are dilution calculations on the PTCE?

    Yes. PTCB's PTCE content outline lists calculations for concentration and dilutions under Order Entry and Processing (4.1).

    References

    1. PTCB. PTCE Content Outline, effective January 6, 2026 (PDF), accessed 2026-11-17
    2. NHA. Test Plan for the ExCPT Exam, 2023 job analysis (PDF), accessed 2026-11-17
    3. ISMP (now part of ECRI). List of High-Alert Medications in Acute Care Settings, accessed 2026-11-17

    PTCB, PTCE and CPhT are trademarks of the Pharmacy Technician Certification Board; NHA and ExCPT are trademarks of the National Healthcareer Association. Not affiliated with or endorsed by either. Course conventions vary: use the rules your program teaches.

    Educational practice only. Not dispensing guidance: always follow your pharmacy's policies, the pharmacist's direction and the product labeling.