Insulin Days' Supply Calculation

Quick answer: Insulin days' supply = total units dispensed ÷ units used per day, rounded down, and never more than the in-use discard limit allows. Total units = mL × units/mL × number of pens or vials. Example: 3 × 10 mL U-100 vials = 3,000 units; 60 units daily gives 50 days. For pens, add 2 priming units per injection.

Practice insulin days' supply (free sample)

0 correct in a row

Free sample problem

Loading a problem…

    Want every problem type, timed exams and mistake drills? Open the practice app.

    Educational practice only. Not dispensing guidance.

    The four steps

    1. Units per vial or pen = mL × units per mL. U-100 means 100 units in each mL.
    2. Total units = units per vial or pen × number dispensed.
    3. Units per day = (dose + priming units, for pens) × injections per day.
    4. Days' supply = total units ÷ units per day, rounded down. Then apply the in-use discard limit.

    Insulin is the one days' supply problem where you divide units, not mL or pens. Mixing the two (for example, dividing 3 mL by a 20-unit dose) gives nonsense, which the practice app catches as its own mistake.

    Product facts used in the practice problems

    Product (as in the app)SizeUnits eachDiscard after first use
    insulin glargine U-100 vial10 mL1,00028 days
    insulin glargine U-100 pen3 mL30028 days
    insulin lispro U-100 vial10 mL1,00028 days
    insulin lispro U-100 pen3 mL30028 days
    insulin lispro U-200 pen3 mL60028 days
    insulin regular human U-500 vial20 mL10,00040 days

    From the Lantus, Humalog and Humulin R U-500 labeling cited below. Always read the label of the product actually dispensed; limits differ between products.

    Priming (the safety test)

    Pen labels direct a small safety test before each injection to make sure insulin flows; for the pens in the practice app that is 2 units. Those units leave the pen, so they count toward daily use: a 20-unit dose three times a day uses (20 + 2) × 3 = 66 units a day, not 60. Courses and plans differ on whether to include priming. The practice app includes it by default and lets you change the priming units in Settings. Vials drawn up with a syringe have no priming.

    The in-use discard limit

    Once opened, each vial or pen must be thrown away after its in-use limit even if insulin is left. If a patient uses only 10 units a day from a 1,000-unit vial, the arithmetic says 100 days, but the vial must be discarded at 28 days. So the days' supply for that vial is 28. With several vials or pens, each one can count for at most its limit. The practice problems state this rule in every insulin question so you know when to apply it.

    Concentrated insulin (U-200, U-500)

    Concentrated insulin packs more units into each mL. A 3 mL U-200 pen holds 600 units; a 20 mL U-500 vial holds 10,000 units. If you calculate as if it were U-100, the days' supply is wrong by a factor of 2 or 5, which the worked examples show. The U-200 KwikPen delivers at most 60 units per injection, so the practice problems never ask for more. U-500 vials are drawn up with a dedicated U-500 syringe.

    Insulin is a high-alert medication. In the pharmacy, a days' supply that looks unusual (very short or very long) is a reason to check the sig and product with the pharmacist, not to adjust the numbers.

    Related calculations

    The general method for tablets, liquids, inhalers and eye drops is in how to calculate days' supply. Reading the sig correctly comes first: see sig codes. For how the exams test days' supply, see PTCE math.

    Worked examples

    These examples come from the practice app's insulin templates (U-100 vials and pens, U-200 pens, U-500 vials), generated at build time from the code that marks your answers.

    Example 1

    Rx: insulin glargine 100 units/mL (U-100). Sig: inject 60 units subcutaneously once daily at the same time each day. Dispense: 3 × 10 mL vials.

    • On hand: insulin glargine 100 units/mL (U-100), multiple-dose vial, 10 mL (HIGH-ALERT).
    • Each vial: 10 mL, 100 units per mL. Discard 28 days after first use.
    • Vial: drawn up with a U-100 insulin syringe (no priming).
    • Plan rule: days' supply cannot be longer than the vials' in-use discard limit allows.

    What is the days' supply for this fill?

    1. Units in each vial = 10 mL × 100 units/mL = 1,000 units (3 vials = 3,000 units).
    2. Units per day = 60 units × 1 = 60 units/day.
    3. Check the in-use limit: each vial is used up in 16.66… days, within its 28-day limit, so the limit does not cap this fill.
    4. 3,000 units ÷ 60 units/day
    5. = 50 days exactly.

    Answer: 50 days

    Example 2

    Rx: insulin lispro 100 units/mL (U-100). Sig: inject 20 units subcutaneously three times a day within 15 minutes before meals. Dispense: 5 × 3 mL pens.

    • On hand: insulin lispro 100 units/mL (U-100), single-patient-use prefilled pen, 3 mL (HIGH-ALERT).
    • Each pen: 3 mL, 100 units per mL. Discard 28 days after first use.
    • Priming (safety test) per your course: 2 units before each injection.
    • Plan rule: days' supply cannot be longer than the pens' in-use discard limit allows.

    What is the days' supply for this fill?

    1. Units in each pen = 3 mL × 100 units/mL = 300 units (5 pens = 1,500 units).
    2. Units per injection = 20 units (dose) + 2 units (priming) = 22 units; × 3 injections a day = 66 units/day.
    3. Check the in-use limit: each pen is used up in 4.54… days, within its 28-day limit, so the limit does not cap this fill.
    4. 1,500 units ÷ 66 units/day
    5. = 22.72… days → rounded down to 22 days.

    Answer: 22 days

    Example 3

    Rx: insulin lispro 200 units/mL (U-200). Sig: inject 26 units subcutaneously three times a day within 15 minutes before meals. Dispense: 6 × 3 mL pens.

    • On hand: insulin lispro 200 units/mL (U-200), single-patient-use prefilled pen, 3 mL (HIGH-ALERT). CONCENTRATED: U-200.
    • Each pen: 3 mL, 200 units per mL. Discard 28 days after first use.
    • Priming (safety test) per your course: 2 units before each injection.
    • Plan rule: days' supply cannot be longer than the pens' in-use discard limit allows.

    What is the days' supply for this fill?

    1. Units in each pen = 3 mL × 200 units/mL = 600 units (6 pens = 3,600 units).
    2. Units per injection = 26 units (dose) + 2 units (priming) = 28 units; × 3 injections a day = 84 units/day.
    3. Check the in-use limit: each pen is used up in 7.14… days, within its 28-day limit, so the limit does not cap this fill.
    4. 3,600 units ÷ 84 units/day
    5. = 42.85… days → rounded down to 42 days.

    Answer: 42 days

    Example 4

    Rx: insulin regular human 500 units/mL (U-500). Sig: inject 150 units subcutaneously three times a day 30 minutes before meals. Dispense: 1 × 20 mL vial.

    • On hand: insulin regular human 500 units/mL (U-500), multiple-dose vial, 20 mL (HIGH-ALERT). CONCENTRATED: U-500.
    • Each vial: 20 mL, 500 units per mL. Discard 40 days after first use.
    • Vial: drawn up with a U-500 insulin syringe (no priming).
    • Plan rule: days' supply cannot be longer than the vials' in-use discard limit allows.

    What is the days' supply for this fill?

    1. Units in each vial = 20 mL × 500 units/mL = 10,000 units (1 vial = 10,000 units).
    2. Units per day = 150 units × 3 = 450 units/day.
    3. Check the in-use limit: each vial is used up in 22.22… days, within its 40-day limit, so the limit does not cap this fill.
    4. 10,000 units ÷ 450 units/day
    5. = 22.22… days → rounded down to 22 days.

    Answer: 22 days

    Common mistakes (and the wrong answers they produce)

    Each mistake is shown with the wrong answer it produces in the worked examples above.

    Counted only one vial or pen

    Wrong answer it gives: 16 days. 3 vials were dispensed. Use all of them: 3 × 1,000 units.

    Forgot the priming units

    Wrong answer it gives: 25 days. Pens need 2 units priming per injection. Add it to each dose: 20 + 2 = 22 units.

    Rounded the days' supply up

    Wrong answer it gives: 23 days. Days' supply rounds down; a patient can't take a partial day's doses. 22.72… → 22.

    Treated concentrated insulin as U-100

    Wrong answer it gives: 21 days. This is U-200: 200 units per mL. Why this matters at the counter: mixing up U-200 and U-100 is a 2-fold insulin dosing error; always read the concentration on the label.

    Frequently asked questions

    How do you calculate days' supply for insulin?

    Find the total units dispensed (mL per vial or pen × units per mL × number of vials or pens). Find the units used per day (dose plus priming, times injections per day). Divide total units by daily units and round down. Then check the in-use discard limit.

    How many units are in an insulin pen or vial?

    Multiply mL by the concentration. A 3 mL U-100 pen holds 300 units, a 10 mL U-100 vial holds 1,000 units, a 3 mL U-200 pen holds 600 units, and a 20 mL U-500 vial holds 10,000 units.

    Do I include priming units in insulin days' supply?

    For pens, yes, if your course or plan counts them. The pen labels used in the practice app (Lantus SoloStar, Humalog KwikPen) direct a 2-unit safety test before each injection, which adds to the daily use. Vials drawn up with a syringe have no priming.

    What is the 28-day rule for insulin?

    Many insulin vials and pens must be discarded a set number of days after first use, even if insulin is left. For the U-100 products in the practice app that limit is 28 days, so one opened vial or pen can never count for more than 28 days. Humulin R U-500 vials have a 40-day in-use limit.

    Why is concentrated insulin a separate skill?

    U-200 and U-500 hold 2 or 5 times as many units per mL as U-100. Treating them as U-100 makes the days' supply wrong by that factor, and the same confusion at the bedside is a dosing error with a high-alert medication.

    Do I round insulin days' supply up or down?

    Down, by default: a partial day is not a full day's supply. Some courses use standard rounding; the practice app follows your course setting and says which rule it used.

    References

    1. DailyMed. Lantus SoloStar (insulin glargine) labeling, set ID 3a97c40f-0c83-42d7-a8ee-484b208db4e3
    2. DailyMed. Humalog KwikPen (insulin lispro) labeling, set ID 51d3dc11-52b9-4296-a2f4-58c770d4448d
    3. DailyMed. Humulin R U-500 and U-500 KwikPen labeling (Eli Lilly), set ID b60e8dd0-1d48-4dc9-87fd-e14675255e8c
    4. PTCB. PTCE Content Outline, effective January 6, 2026 (PDF), accessed 2026-11-17

    PTCB, PTCE and CPhT are trademarks of the Pharmacy Technician Certification Board; NHA and ExCPT are trademarks of the National Healthcareer Association. Not affiliated with or endorsed by either. Course conventions vary: use the rules your program teaches.

    Educational practice only. Not dispensing guidance: always follow your pharmacy's policies, the pharmacist's direction and the product labeling.