Free learning calculators

Anion Gap Calculator (with Albumin Correction and Delta Ratio)

Quick answer: Anion gap = Na − (Cl + HCO3-). Correct for low albumin by adding 2.5 for every 1 g/dL below 4.0. For Na 140, Cl 100, HCO3- 14 and albumin 2.0 g/dL: AG = 26, corrected AG = 31. The delta ratio (31 − 12) ÷ (24 − 14) = 1.9 fits a pure high anion gap acidosis.

Learning aid: check your practice answers. Not for clinical decisions.

Anion gap
26 mmol/L
Albumin-corrected AG
31 mmol/L
Delta ratio
1.9

Formula

  • AG = Na − (Cl + HCO3-) [+ K if included]
  • Corrected AG = AG + 2.5 × (4.0 − albumin g/dL) = AG + 0.25 × (40 − albumin g/L)
  • Delta ratio = (corrected AG − normal AG) ÷ (24 − HCO3-)

Step-by-step working

  1. AG = 140 − (100 + 14) = 26 mmol/L.
  2. Corrected AG = 26 + 2.5 × (4.0 − 2) = 31 mmol/L.
  3. Delta ratio = (31 − 12) ÷ (24 − 14) = 19 ÷ 10 = 1.9.

Normal AG used here: 12 mmol/L (without K). Normal ranges vary by laboratory.

Delta ratio 0.8–2: consistent with a pure high anion gap acidosis.

How the anion gap works

Blood is electrically neutral, but routine panels measure only some ions. The anion gap is the difference between the main measured cation (sodium) and the main measured anions (chloride and bicarbonate). It mostly reflects unmeasured anions, of which albumin is the largest. A raised gap points to added acids such as lactate or ketones.

Because albumin is part of the normal gap, a low albumin hides a raised gap. The Figge correction adds 2.5 mmol/L for each 1 g/dL that albumin falls below 4.0 g/dL (0.25 per g/L below 40 g/L). Some courses add potassium; if you include K, the normal gap is higher (16 rather than 12 in ABG Drills).

The delta ratio compares how far the gap rose with how far bicarbonate fell. It helps reveal a second metabolic process hiding behind a high anion gap acidosis.

Worked example

Labs: Na 140, Cl 100, HCO3- 14 mmol/L; albumin 2.0 g/dL.

  1. AG = 140 − (100 + 14) = 26 mmol/L.
  2. Corrected AG = 26 + 2.5 × (4.0 − 2.0) = 31 mmol/L.
  3. Delta ratio = (31 − 12) ÷ (24 − 14) = 19 ÷ 10 = 1.9.
  4. 1.9 sits in the 0.8–2 band: consistent with a pure high anion gap metabolic acidosis.

Delta ratio bands used here

What raises the anion gap

A raised gap means unmeasured anions have been added to the blood. Common causes are lactic acidosis, ketoacidosis (diabetic, alcoholic or starvation), kidney failure and toxic alcohols such as methanol and ethylene glycol, often remembered with mnemonics like GOLD MARK or MUDPILES. A normal-gap acidosis, by contrast, usually reflects bicarbonate loss through diarrhoea or the kidney, with chloride rising to take its place. Working out the gap, correcting it for albumin and checking the delta ratio is the standard sequence for any metabolic acidosis.

Common mistakes

Frequently asked questions

What is the anion gap formula?

AG = Na − (Cl + HCO3-). Some courses include potassium: AG = (Na + K) − (Cl + HCO3-).

How do you correct the anion gap for albumin?

Add 2.5 × (4.0 − albumin in g/dL), or 0.25 × (40 − albumin in g/L), to the calculated gap.

What is a normal anion gap?

ABG Drills uses 12 mmol/L without potassium and 16 with potassium. Reference ranges vary between laboratories and analysers.

What does the delta ratio tell you?

It compares the rise in anion gap with the fall in bicarbonate. Values of 0.8–2 fit a pure high anion gap acidosis; lower or higher values suggest a second metabolic process.

References

  1. Kraut JA, Madias NE. Serum anion gap: its uses and limitations in clinical medicine. Clin J Am Soc Nephrol. 2007;2(1):162-174. doi:10.2215/CJN.03020906
  2. Figge J, Jabor A, Kazda A, Fencl V. Anion gap and hypoalbuminemia. Crit Care Med. 1998;26(11):1807-1810. doi:10.1097/00003246-199811000-00019
  3. Rastegar A. Use of the ΔAG/ΔHCO3- ratio in the diagnosis of mixed acid-base disorders. J Am Soc Nephrol. 2007;18(9):2429-2431. doi:10.1681/ASN.2006121408
  4. Clinical Drills content packages (founder-reviewed formula sets; the calculators call the same functions the practice apps grade with).

Educational practice only. This calculator is a learning aid for checking practice answers. It is not clinical decision support and must not be used for patient care. Always follow your institution's policies, current drug references and the prescriber's order.