Anion Gap: Formula, Albumin Correction and Practice
Quick answer: Anion gap = Na+ − (Cl- + HCO3-). Normal is about 12 mmol/L without potassium, depending on the analyser. Correct for low albumin by adding 2.5 for every 1 g/dL below 4.0. Example: Na 140, Cl 100, HCO3- 12 gives 28; with albumin 2.0 g/dL the corrected gap is 33.
The anion gap sorts a metabolic acidosis into high-gap (added acid) or normal-gap (bicarbonate loss).
AG = Na+ − (Cl- + HCO3-)
Corrected AG = AG + 2.5 × (4.0 − albumin g/dL) [or + 0.25 × (40 − albumin g/L)]
- Calculate the anion gap from the electrolytes.
- If albumin is low, correct the gap.
- Compare with your normal value: raised = AGMA (e.g. ketoacidosis, lactate, renal failure, toxins); normal = NAGMA (e.g. diarrhea, renal tubular acidosis, large volumes of saline).
Worked examples
Example 1: Na 140, Cl 100, HCO3- 12 → AG = 140 − (100 + 12) = 28 mmol/L: raised. With K+ 4.0 included, AG = 32 (compare with a normal of 16).
Example 2: the same gas with albumin 2.0 g/dL: corrected AG = 28 + 2.5 × (4.0 − 2.0) = 33 mmol/L. In g/L: 28 + 0.25 × (40 − 20) = 33. The gap uses no gas pressures, so it is the same for mmHg and kPa courses.
If the gap is raised, go on to the delta ratio (here (33 − 12) ÷ (24 − 12) = 1.75) to look for a second metabolic disorder. Reference ranges are on normal ABG values.
Common mistakes
- Forgetting to subtract HCO3-.
- Mixing the with-K and without-K conventions (normal 16 vs 12).
- Skipping the albumin correction, so a high-gap acidosis looks normal-gap.
Practice it now: a new gas every time
Pressures follow your ABG Drills settings (mmHg or kPa; change them under Settings in the practice app). Your answers are saved on this device only.
Frequently asked questions
What is a normal anion gap?
Commonly about 12 mmol/L without potassium (about 16 with K+), but it depends on the analyser; modern machines often read lower. ABG Drills lets you set the value your course uses.
How do you calculate the anion gap?
Subtract chloride and bicarbonate from sodium: Na+ − (Cl- + HCO3-). If your course includes potassium, add K+ to sodium first. Na 140, Cl 100, HCO3- 12 gives 28 mmol/L (32 with K+ 4.0).
Why correct the anion gap for albumin?
Albumin is the main unmeasured anion. Every 1 g/dL fall in albumin lowers the gap by about 2.5, so low albumin can hide a high-gap acidosis.
What causes a high anion gap metabolic acidosis?
GOLD MARK: glycols, oxoproline, L-lactate, D-lactate, methanol, aspirin, renal failure and ketoacidosis. MUDPILES is the older mnemonic.
What causes a normal anion gap metabolic acidosis?
Mainly diarrhea (or high stoma output), large volumes of saline and renal tubular acidosis. The chloride rises as bicarbonate falls, so the gap stays normal.
References
- Kraut JA, Madias NE. Serum anion gap: its uses and limitations in clinical medicine. Clin J Am Soc Nephrol 2007;2:162–74. doi:10.2215/CJN.03020906
- Figge J, Jabor A, Kazda A, Fencl V. Anion gap and hypoalbuminemia. Crit Care Med 1998;26:1807–10. doi:10.1097/00003246-199811000-00019
- Mehta AN, Emmett JB, Emmett M. GOLD MARK: an anion gap mnemonic for the 21st century. Lancet 2008;372:892. doi:10.1016/S0140-6736(08)61398-7 (MUDPILES also accepted)
- Deranged Physiology. The anion gap; its merits and demerits. https://derangedphysiology.com/main/cicm-primary-exam/acid-base-physiology/Chapter-704/anion-gap-its-merits-and-demerits
Teaching formulas and ranges vary between courses and laboratories. Use the values your programme teaches.
Educational practice only. Simulated gases; not a clinical decision tool. Reference ranges vary by laboratory.