Free learning calculators

Alligation Calculator

Quick answer: Alligation finds how much of two strengths to mix. Parts of the higher strength = desired − lower; parts of the lower strength = higher − desired. To make 100 g of 5% from 10% and 2%: 3 parts of 10% and 5 parts of 2% (8 parts in total), so 37.5 g of 10% and 62.5 g of 2%.

Learning aid: check your practice answers. Not for clinical decisions.

Amount of 10%
37.5 g
Amount of 2%
62.5 g

Formula

  • Parts of higher = desired − lower
  • Parts of lower = higher − desired
  • Amount = total × (parts ÷ total parts)

Step-by-step working

  1. Parts of 10% = 5 − 2 = 3; parts of 2% = 10 − 5 = 5; total parts = 8.
  2. 10%: 100 g × 3/8 = 37.5 g.
  3. 2%: 100 g × 5/8 = 62.5 g.
  4. Check: 37.5 + 62.5 = 100 g.

How alligation alternate works

Alligation alternate is a shortcut for mixing two stock strengths to reach a target strength in between. Write the higher strength top left, the lower strength bottom left and the desired strength in the middle. Subtract diagonally, ignoring signs: the difference between desired and lower gives the parts of the higher strength, and the difference between higher and desired gives the parts of the lower strength. Then share the total amount in proportion to those parts.

A diluent or plain base (petrolatum, water) counts as 0%. The calculator uses the same exact functions as the alligation unit in Pharm Calc Drills, so a repeating answer like 33.33… is shown exactly in the working and to 2 decimal places in the result.

Worked example

Task: Make 100 g of a 5% ointment from 10% and 2% ointments.

  1. Parts of 10% = 5 − 2 = 3.
  2. Parts of 2% = 10 − 5 = 5.
  3. Total parts = 3 + 5 = 8.
  4. 10%: 100 g × 3/8 = 37.5 g.
  5. 2%: 100 g × 5/8 = 62.5 g.
  6. Check: 37.5 + 62.5 = 100 g, and (37.5 × 10 + 62.5 × 2) ÷ 100 = 5%.

How to check your answer

Multiply each amount by its strength, add the products and divide by the total amount. The result should equal the desired strength. If it does not, the parts were probably swapped.

When pharmacists use it

Alligation is used in compounding when a prescribed strength is not commercially available, for example a 5% ointment made from 10% and 2% products, or a 70% alcohol solution made from 95% alcohol and water. It works for percentages by weight in weight (w/w), weight in volume (w/v) and volume in volume (v/v), as long as both stocks and the target use the same type of percentage. Some courses teach the same problem with the C1V1 = C2V2 dilution formula when one of the stocks is a pure diluent; both methods give the same answer.

Common mistakes

Note: the PTCB removed alligation from the PTCE content outline in January 2026, but it remains on the ExCPT and in many technician and pharmacy courses.

Frequently asked questions

What is alligation in pharmacy?

A method for working out how much of a higher and a lower strength to mix to make a desired strength in between.

How do you do alligation alternate?

Parts of the higher strength = desired − lower; parts of the lower = higher − desired. Divide each by the total parts and multiply by the total amount.

What percentage is a diluent in alligation?

A plain diluent or base, such as water or petrolatum, counts as 0%.

Is alligation on the PTCE?

The PTCB removed alligation from the PTCE content outline in January 2026. It is still tested on the ExCPT and in many courses.

References

  1. NHA ExCPT Detailed Test Plan (2023 job analysis), 4C Calculations, K.120 Alligation.
  2. PTCB. PTCE Job Analysis Study (alligations removed for the January 2026 PTCE). https://ptcb.org/news/ptce-job-analysis-study/
  3. Clinical Drills content packages (founder-reviewed formula sets; the calculators call the same functions the practice apps grade with).

Educational practice only. This calculator is a learning aid for checking practice answers. It is not clinical decision support and must not be used for patient care. Always follow your institution's policies, current drug references and the prescriber's order.