mg/hr to mL/hr: Continuous Infusion Rates
Quick answer: To convert mg/hr to mL/hr, divide the ordered dose per hour by the bag concentration: mg/hr ÷ mg/mL = mL/hr. Magnesium sulfate 20 g in 500 mL is 40 mg/mL, so an order for 2 g/hr (2,000 mg/hr) runs at 2,000 ÷ 40 = 50 mL/hr. For mg/min orders, multiply by 60 first.
The mg/hr to mL/hr formula
Many continuous infusions are ordered as a mass of drug per hour (mg/hr or g/hr) or per minute (mg/min). The pump needs a volume per hour. The bridge is the bag concentration in mg/mL:
mg/mL = total drug (mg) ÷ total volume (mL)
mL/hr = ordered mg/hr ÷ mg/mL
mg/hr = pump mL/hr × mg/mL
It is the same pattern as a heparin drip with milligrams in place of units, and it is D/H × Q in disguise: D is the hourly dose, H is the drug in the bag and Q is the bag volume. In dimensional analysis:
2,000 mg/hr × 1 mL/40 mg = 50 mL/hr
Milligrams cancel and mL/hr remains. If the answer comes out in mg²/mL or hr/mL, a fraction is upside down.
Premixed bags used in practice
These premixed products, listed in the FDA NDC directory, are used for mg-based infusion practice in Dosage Drills:
| Bag | Concentration |
|---|---|
| magnesium sulfate 4 g in 100 mL | 40 mg/mL |
| magnesium sulfate 20 g in 500 mL | 40 mg/mL |
| magnesium sulfate 40 g in 1,000 mL | 40 mg/mL |
| amiodarone (NEXTERONE) 360 mg in 200 mL | 1.8 mg/mL |
The magnesium sulfate label describes a 4 g IV initial dose at a rate generally not over 150 mg/min, and notes that some clinicians then give 1 to 2 g/hr by constant infusion. The NEXTERONE label describes 1 mg/min for 6 hours, then 0.5 mg/min. Practice problems use those numbers so the arithmetic looks like real orders. They are calculation practice only, not dosing guidance.
Worked examples
Example 1: g/hr to mL/hr
Order: magnesium sulfate 2 g/hr IV. Bag: 20 g in 500 mL.
20 g = 20,000 mg; 20,000 mg ÷ 500 mL = 40 mg/mL
2 g/hr = 2,000 mg/hr
2,000 ÷ 40 = 50 mL/hr
Example 2: a lower hourly dose
Order: magnesium sulfate 1 g/hr IV. Bag: 40 mg/mL.
1,000 mg/hr ÷ 40 mg/mL = 25 mL/hr
Example 3: a loading dose over minutes
Order: magnesium sulfate 4 g IV over 30 minutes. Bag: 4 g in 100 mL.
100 mL ÷ 30 min × 60 = 200 mL/hr
Check the rate in mg/min: 4,000 mg ÷ 30 min = 133 mg/min, under the label's 150 mg/min. A whole bag over a set time is solved like an IV piggyback: volume ÷ minutes × 60.
Example 4: mL/hr back to g/hr
Situation: a 40 mg/mL magnesium bag is running at 37.5 mL/hr. What is the hourly dose?
37.5 × 40 = 1,500 mg/hr = 1.5 g/hr
Orders in mg/min
Some drugs are ordered per minute. Convert to per hour by multiplying by 60, then divide by the concentration:
mL/hr = mg/min × 60 ÷ mg/mL
Example 5: amiodarone 1 mg/min
Order: amiodarone 1 mg/min IV. Bag: NEXTERONE 360 mg in 200 mL.
360 ÷ 200 = 1.8 mg/mL
1 mg/min × 60 = 60 mg/hr
60 ÷ 1.8 = 33.33… → 33.3 mL/hr
Example 6: amiodarone 0.5 mg/min
Order: amiodarone 0.5 mg/min IV. Bag: 1.8 mg/mL.
0.5 × 60 = 30 mg/hr
30 ÷ 1.8 = 16.66… → 16.7 mL/hr
Halving the dose halves the rate. Calculate it fresh rather than halving a rounded number.
Orders in mcg/min or mcg/kg/min follow the same logic with one more conversion (mg to mcg) and, for weight-based orders, the weight. See mcg/kg/min drip calculation.
Three quick checks
Every mg/hr problem can be checked in a few seconds without redoing the whole calculation:
- Reverse it. Multiply your mL/hr by the mg/mL. You should get back the ordered mg/hr: 50 mL/hr × 40 mg/mL = 2,000 mg/hr = 2 g/hr.
- Compare with 1 mg/mL. If the bag were 1 mg/mL, mL/hr would equal mg/hr. A stronger bag must give a smaller rate; a weaker bag a larger one. Amiodarone at 1.8 mg/mL gives a rate a little over half the mg/hr figure (60 mg/hr → 33.3 mL/hr).
- Check how long the bag lasts. Volume ÷ rate gives hours: a 500 mL magnesium bag at 50 mL/hr lasts 10 hours. If your rate would empty a bag in a few minutes, something is wrong.
Rounding follows the pump: most programs round mL/hr to tenths for adults, and some round to whole numbers. Round only once, at the end. If you round and then calculate onward from the rounded number, small errors add up, especially when you later work back from the pump rate to the dose.
Exam questions often give the concentration indirectly, for example "magnesium sulfate 40 g in 1,000 mL". Write the concentration as its own line (40,000 mg ÷ 1,000 mL = 40 mg/mL) before using it. That one extra line makes a unit mismatch easy to spot, and it is the same habit the heparin drip and insulin drip guides recommend.
Common mistakes
- Unit mismatch. g/hr against mg/mL without converting is a 1,000-fold error. Convert first (see unit conversions).
- Forgetting × 60 for per-minute orders. 1 mg/min is 60 mg/hr, not 1 mg/hr.
- Dividing the wrong way. mg/mL ÷ mg/hr gives hr/mL. Dose goes on top.
- Entering the dose as the rate. 2 g/hr is not 2 mL/hr. The pump is in mL/hr.
- Assuming the concentration. Different bags of the same drug can differ; magnesium happens to be 40 mg/mL in all three sizes here, but many drugs are not.
Magnesium sulfate and IV amiodarone are on the ISMP high-alert list, and continuous infusions of them are usually double-checked. Practicing the conversion until it is automatic keeps your attention on that check.
Frequently asked questions
How do you convert mg/hr to mL/hr?
Divide the dose per hour by the concentration: mg/hr ÷ mg/mL = mL/hr. Magnesium sulfate 2 g/hr (2,000 mg/hr) from a 40 mg/mL bag runs at 2,000 ÷ 40 = 50 mL/hr.
How do you convert mg/min to mL/hr?
Multiply mg/min by 60 to get mg/hr, then divide by mg/mL. Amiodarone 1 mg/min from a 1.8 mg/mL bag is 60 mg/hr ÷ 1.8 = 33.3 mL/hr.
How do you convert mL/hr back to mg/hr?
Multiply the pump rate by the concentration: mL/hr × mg/mL = mg/hr. 25 mL/hr of a 40 mg/mL magnesium bag delivers 1,000 mg/hr, which is 1 g/hr.
How do you find the concentration of a premixed bag in mg/mL?
Divide the total drug by the total volume, in the same mass unit as the order. Magnesium sulfate 20 g in 500 mL is 20,000 mg ÷ 500 mL = 40 mg/mL. Amiodarone 360 mg in 200 mL is 1.8 mg/mL.
What if the order is in g/hr but the bag is in mg/mL?
Convert so the units match before dividing. 2 g/hr = 2,000 mg/hr. Dividing 2 by 40 instead gives 0.05 mL/hr, a 1,000-fold error.
Related guides
References
- Magnesium sulfate in water for injection (premixed): FDA-approved prescribing information, DailyMed set ID 22ca78b4-f5a3-4144-cf89-5f633acf1e6d (U.S. National Library of Medicine).
- NEXTERONE (amiodarone HCl) premixed injection (Baxter): FDA-approved prescribing information, DailyMed set ID e9108958-b8d7-4fba-87c3-9a32990de551 (U.S. National Library of Medicine).
- U.S. Food and Drug Administration. National Drug Code (NDC) Directory, via openFDA (product strengths checked 2026-11-16).
- Institute for Safe Medication Practices (ISMP). ISMP List of High-Alert Medications in Acute Care Settings.
- Institute for Safe Medication Practices (ISMP). ISMP List of Error-Prone Abbreviations, Symbols, and Dose Designations (leading zeros, no trailing zeros).
- Pickar GD, et al. Dosage Calculations. Cengage Learning (current edition).
- Burchum JR, Rosenthal LD. Lehne's Pharmacology for Nursing Care. Elsevier (current edition).
Educational practice only. These worked examples teach calculation skills. They are not dosing guidance. Always follow your institution's policies, current drug references and the prescriber's order.