Insulin Drip Calculation

Quick answer: To set an insulin drip, divide the ordered units/hr by the bag concentration: units/hr ÷ units/mL = mL/hr. The premixed regular insulin bag of 100 units in 100 mL is 1 unit/mL, so 8 units/hr runs at 8 mL/hr. For a weight-based order, multiply units/kg/hr by kg first: 0.1 × 80 kg = 8 units/hr.

The insulin drip formula

A continuous IV insulin infusion is ordered in units per hour, or as a weight-based rate in units per kilogram per hour. The pump runs in mL/hr. As with any drip, the link is the bag concentration.

units/mL = units in bag ÷ mL in bag

units/hr = units/kg/hr × weight (kg)

mL/hr = units/hr ÷ units/mL

units/hr = mL/hr × units/mL

It is the same structure as the heparin drip: dose per hour divided by dose per mL. Always write "units" in full. The abbreviation "U" is on the Joint Commission's Do Not Use list because a handwritten U can be read as a 0, turning 4 U into 40.

The 1 unit/mL bag

The premixed regular insulin product in the FDA NDC directory, MYXREDLIN, contains 100 units of human insulin in 100 mL of 0.9% sodium chloride: 100 ÷ 100 = 1 unit/mL. That concentration is convenient because units/hr and mL/hr are the same number. It is also why insulin drip questions can feel too easy: the real skill is the weight step and reading the bag, not the division.

Dosage Drills uses only the 1 unit/mL concentration, for both premixed and pharmacy-prepared bags, because no other premixed concentration is listed in the NDC directory. Weight-based practice orders use 0.1 or 0.14 units/kg/hr, the rates stated in the American Diabetes Association consensus statement on hyperglycemic crises in adults (Kitabchi et al., 2009).

Worked examples

Practice problems only. Insulin infusion protocols vary widely between facilities; always follow your protocol and the prescriber's order.

Example 1: weight-based order to mL/hr

Order: regular insulin 0.1 units/kg/hr IV. Weight: 80 kg. Bag: 100 units in 100 mL.

0.1 units/kg/hr × 80 kg = 8 units/hr
100 units ÷ 100 mL = 1 unit/mL
8 ÷ 1 = 8 mL/hr

Example 2: 0.14 units/kg/hr

Order: regular insulin 0.14 units/kg/hr IV. Weight: 75 kg. Bag: 1 unit/mL.

0.14 × 75 = 10.5 units/hr
10.5 ÷ 1 = 10.5 mL/hr

Example 3: weight in pounds

Order: regular insulin 0.1 units/kg/hr IV. Weight: 198 lb. Bag: 1 unit/mL.

198 lb ÷ 2.2 = 90 kg
0.1 × 90 = 9 units/hr → 9 mL/hr

Skipping the conversion would give 19.8 mL/hr, more than twice the ordered dose.

Example 4: pump rate back to units/kg/hr

Situation: an insulin drip (1 unit/mL) is running at 7 mL/hr. Weight 70 kg. What is the weight-based rate?

7 mL/hr × 1 unit/mL = 7 units/hr
7 ÷ 70 kg = 0.1 units/kg/hr

Worked-back units/kg/hr values are usually given to hundredths, since the orders themselves are 0.1 or 0.14.

When the concentration is not 1 unit/mL

Exam questions sometimes use a different made-up concentration to test that you divide rather than copy the number. The method does not change. For example, a textbook bag of 250 units in 250 mL is still 1 unit/mL, but a bag of 50 units in 100 mL would be 0.5 units/mL, and then 5 units/hr would be 5 ÷ 0.5 = 10 mL/hr. Real bags in your facility may differ, so read the label every time rather than assuming units/hr equals mL/hr.

Checking your answer

Insulin drip arithmetic is short, so the checks matter more than the calculation. A few habits catch most errors before they reach the pump:

Rate changes on an insulin drip are usually driven by a protocol table of blood glucose results, much like the aPTT table in the heparin drip guide. Those tables differ from one facility to the next, so Dosage Drills does not teach any one of them. What stays constant is the conversion: whatever new units/hr the protocol gives, divide by the concentration to get the new mL/hr. Practice that step until it is automatic, and the protocol table becomes the only thing you need to read carefully.

Common mistakes

Insulin is on the ISMP list of high-alert medications in both its IV and subcutaneous forms, and many hospitals require an independent double-check of every infusion change. For other drips ordered per kilogram, see mcg/kg/min drip calculations; for the general pump formula, see IV flow rate in mL/hr.

Frequently asked questions

How do you calculate an insulin drip rate?

Divide the ordered units/hr by the bag concentration in units/mL: units/hr ÷ units/mL = mL/hr. With the common 100 units in 100 mL bag (1 unit/mL), the numbers are the same: 8 units/hr runs at 8 mL/hr.

How do you calculate a weight-based insulin drip?

Multiply units/kg/hr by the weight in kg to get units/hr, then divide by the concentration. 0.1 units/kg/hr for an 80 kg patient is 8 units/hr, which is 8 mL/hr of a 1 unit/mL bag.

What is the concentration of an insulin drip?

The premixed regular insulin product listed in the FDA NDC directory (MYXREDLIN) is 100 units in 100 mL of 0.9% sodium chloride, which is 1 unit/mL. Pharmacy-prepared bags are often made to the same concentration, but always calculate from the bag you have.

How do you convert insulin mL/hr to units/hr?

Multiply the pump rate by the concentration: mL/hr × units/mL = units/hr. At 1 unit/mL, 6.5 mL/hr is 6.5 units/hr. To get units/kg/hr, divide by the weight in kg.

Which insulin is used in an IV drip?

Regular (short-acting) human insulin. The 0.1 and 0.14 units/kg/hr figures in practice problems come from the ADA consensus statement on hyperglycemic crises (Kitabchi 2009). Real protocols differ by facility; this page is calculation practice only.

References

  1. MYXREDLIN (insulin human) injection, 100 units/100 mL (Baxter): FDA-approved prescribing information, DailyMed set ID afca6e80-a802-49fb-a978-5fe28a173001 (U.S. National Library of Medicine).
  2. Kitabchi AE, Umpierrez GE, Miles JM, Fisher JN. Hyperglycemic crises in adult patients with diabetes. Diabetes Care. 2009;32(7):1335-1343. doi:10.2337/dc09-9032.
  3. U.S. Food and Drug Administration. National Drug Code (NDC) Directory, via openFDA (product strengths checked 2026-11-16).
  4. Institute for Safe Medication Practices (ISMP). ISMP List of High-Alert Medications in Acute Care Settings.
  5. The Joint Commission. Official "Do Not Use" List of Abbreviations.
  6. Institute for Safe Medication Practices (ISMP). ISMP List of Error-Prone Abbreviations, Symbols, and Dose Designations (leading zeros, no trailing zeros).
  7. Pickar GD, et al. Dosage Calculations. Cengage Learning (current edition).
  8. Burchum JR, Rosenthal LD. Lehne's Pharmacology for Nursing Care. Elsevier (current edition).

Educational practice only. These worked examples teach calculation skills. They are not dosing guidance. Always follow your institution's policies, current drug references and the prescriber's order.