Heparin Drip Calculator (units/hr ↔ mL/hr)
Quick answer: First find the bag concentration: units in the bag ÷ mL in the bag. Then mL/hr = ordered units/hr ÷ units/mL. A 25,000 units in 250 mL bag is 100 units/mL, so 1,200 units/hr runs at 12 mL/hr. To go back, multiply: mL/hr × units/mL = units/hr.
- Pump rate
- 12 mL/hr
- Concentration
- 100 units/mL
Formula
Concentration (units/mL) = units in bag ÷ mL in bagmL/hr = units/hr ÷ units/mLunits/hr = mL/hr × units/mL
Step-by-step working
- Concentration = 25,000 units ÷ 250 mL = 100 units/mL.
- mL/hr = 1,200 units/hr ÷ 100 units/mL = 12 mL/hr.
- Answer: 12 mL/hr.
Heparin is a high-alert medication. Program the pump in mL/hr, and write "units" in full (never "U").
How heparin drip conversions work
A continuous heparin infusion is ordered as a dose per hour (units/hr), but the pump is programmed as a volume per hour (mL/hr). The bag's concentration links the two. Premixed heparin commonly comes as 25,000 units in 250 mL (100 units/mL), 25,000 units in 500 mL (50 units/mL) or 20,000 units in 500 mL (40 units/mL).
This calculator uses the same exact-decimal function as the heparin drip skill in Dosage Drills. Pump rates round to tenths of a mL/hr; doses worked back from a pump rate round to whole units.
Worked examples
Example 1 (units/hr → mL/hr): Order 1,200 units/hr. Bag: 25,000 units in 250 mL.
- Concentration = 25,000 ÷ 250 = 100 units/mL.
- Rate = 1,200 ÷ 100 = 12 mL/hr.
Example 2 (units/hr → mL/hr): Order 1,000 units/hr. Bag: 25,000 units in 500 mL.
- Concentration = 25,000 ÷ 500 = 50 units/mL.
- Rate = 1,000 ÷ 50 = 20 mL/hr.
Example 3 (mL/hr → units/hr): The pump runs at 16 mL/hr from a 100 units/mL bag.
- Dose = 16 × 100 = 1,600 units/hr.
A quick sense check
Before trusting any answer, estimate it. With a 100 units/mL bag, the pump rate is always the units/hr divided by 100, so typical maintenance doses of roughly 1,000 to 1,600 units/hr give rates in the low teens of mL/hr. With a 50 units/mL bag the rate doubles. If your answer is in the hundreds or below 1 mL/hr, something has gone wrong, usually an inverted concentration or a units-for-mL swap. Independent double checks of heparin infusions by a second nurse are common policy for exactly this reason.
Common mistakes
- Programming the pump in units. Entering 1,200 as mL/hr instead of 12 is a 100-fold overdose with a 100 units/mL bag. Heparin is on the ISMP list of high-alert medications for this reason.
- Inverting the concentration. mL per unit (0.01) instead of units per mL (100) puts the fraction upside down. Write units next to every number.
- Using the wrong bag. The same order runs at different rates in a 250 mL and a 500 mL bag. Read the bag in the question.
- Writing "U" for units. The abbreviation is on the Joint Commission's Do Not Use list because it can be misread as a 0 or a 4.
What about weight-based protocols?
Many facilities start heparin from a weight-based nomogram (a bolus in units/kg and an infusion in units/kg/hr) and adjust by aPTT or anti-Xa level. This calculator only does the units/hr ↔ mL/hr step. Practise the full protocol arithmetic with the example protocol in the heparin drip guide and app; real protocols vary by facility.
Frequently asked questions
How do you calculate a heparin drip rate in mL/hr?
Divide the ordered units/hr by the bag concentration in units/mL. With 100 units/mL, 1,200 units/hr runs at 12 mL/hr.
What is the concentration of 25,000 units in 250 mL?
25,000 ÷ 250 = 100 units/mL. A 25,000 units in 500 mL bag is 50 units/mL.
How do you convert mL/hr to units/hr for heparin?
Multiply the pump rate by the concentration: mL/hr × units/mL. 16 mL/hr of a 100 units/mL bag delivers 1,600 units/hr.
Should heparin drip rates be rounded?
Pump rates are usually rounded to tenths of a mL/hr and doses worked back from a rate to whole units. Follow your facility protocol.
Related pages
- Heparin drip calculation guide
- Heparin drip worksheet
- IV flow rate calculator
- Weight-based dosing guide
- All free learning calculators
References
- Heparin sodium in 5% dextrose injection (premixed): FDA-approved prescribing information, DailyMed set ID 92a6f533-1a3d-4734-b413-d245592454e3.
- Institute for Safe Medication Practices (ISMP). ISMP List of High-Alert Medications in Acute Care Settings.
- Pickar GD, et al. Dosage Calculations. Cengage Learning (current edition).
- Clinical Drills content packages (founder-reviewed formula sets; the calculators call the same functions the practice apps grade with).
Educational practice only. This calculator is a learning aid for checking practice answers. It is not clinical decision support and must not be used for patient care. Always follow your institution's policies, current drug references and the prescriber's order.