← All practice questions

Heparin drip practice questions with answers

Heparin drip questions convert between the ordered dose and the pump rate using the bag concentration: units/hr ÷ units/mL = mL/hr, and mL/hr × units/mL = units/hr. A 25,000 units in 250 mL bag is 100 units/mL. These 10 questions include a weight-based example protocol for practice and subcutaneous heparin doses.

Practice unlimited questions free → Conversions and tablets (Units 1 and 2) are free; heparin drips are part of the Dosage Drills pass.

Example protocol for practice only. The weight-based protocol in these questions is an EXAMPLE PROTOCOL FOR PRACTICE ONLY (modelled on Raschke 1993). Real heparin protocols differ between facilities: always follow your own facility's protocol and orders.

10 practice questions

Work each question on paper first, then open "Show answer and worked solution". The questions come from the same generator as the practice app, with fixed numbers so this page stays the same.

  1. Adult.

    Order: heparin continuous IV infusion per provider order

    On hand: heparin sodium 25,000 units / 250 mL (100 units/mL) premixed IV bag in 0.45% sodium chloride (250 mL bag).

    The pump is running at 16.5 mL/hr.

    How many units/hr is the patient receiving? (Round to a whole number of units.)

    Answer: ______ units/hr

    Show answer and worked solution

    Answer: 1,650 units/hr

    1. Concentration: 25,000 units ÷ 250 mL = 100 units/mL.
    2. units/hr = mL/hr × units/mL = 16.5 × 100
    3. = 1650 units/hr
  2. Adult, 69 kg.

    Order: heparin IV per weight-based heparin protocol (example protocol below)

    On hand: heparin sodium 25,000 units / 500 mL (50 units/mL) premixed IV bag in 0.45% sodium chloride (500 mL bag).

    Example protocol for practice only — always follow your institution's protocol.

    Modelled on Raschke et al., Ann Intern Med 1993 (weight-based heparin nomogram).

    Protocol start: bolus 80 units/kg IV, then infusion 18 units/kg/hr.

    At what rate (mL/hr) will you start the infusion? (Round to tenths of a mL/hr.)

    Answer: ______ mL/hr

    Show answer and worked solution

    Answer: 24.8 mL/hr

    1. 18 units/kg/hr × 69 kg = 1,242 units/hr.
    2. Concentration: 25,000 units ÷ 500 mL = 50 units/mL.
    3. 1,242 units/hr ÷ 50 units/mL
    4. = 24.84 mL/hr → rounded to 24.8 mL/hr
  3. Adult.

    Order: heparin 5,000 units SubQ every 8 hours

    On hand: heparin sodium 5,000 units/mL single-dose vial (1 mL).

    Heparin is a high-alert medication: many facilities require an independent double check.

    How many mL will you give? (Round to tenths (hundredths if under 1 mL).)

    Answer: ______ mL

    Show answer and worked solution

    Answer: 1 mL

    1. Desired (D) = 5000 units. Have (H) = 5000 units. Quantity (Q) = 1 mL.
    2. D ÷ H × Q = 5000 ÷ 5000 × 1 mL
    3. = 1 mL
  4. Adult.

    Order: heparin continuous IV infusion per provider order

    On hand: heparin sodium 25,000 units / 500 mL (50 units/mL) premixed IV bag in 0.45% sodium chloride (500 mL bag).

    The pump is running at 19 mL/hr.

    How many units/hr is the patient receiving? (Round to a whole number of units.)

    Answer: ______ units/hr

    Show answer and worked solution

    Answer: 950 units/hr

    1. Concentration: 25,000 units ÷ 500 mL = 50 units/mL.
    2. units/hr = mL/hr × units/mL = 19 × 50
    3. = 950 units/hr
  5. Adult, 66 kg.

    Order: heparin IV per weight-based heparin protocol (example protocol below)

    On hand: heparin sodium 25,000 units / 500 mL (50 units/mL) premixed IV bag in 0.45% sodium chloride (500 mL bag).

    Example protocol for practice only — always follow your institution's protocol.

    Modelled on Raschke et al., Ann Intern Med 1993 (weight-based heparin nomogram).

    Protocol start: bolus 80 units/kg IV, then infusion 18 units/kg/hr.

    At what rate (mL/hr) will you start the infusion? (Round to tenths of a mL/hr.)

    Answer: ______ mL/hr

    Show answer and worked solution

    Answer: 23.8 mL/hr

    1. 18 units/kg/hr × 66 kg = 1,188 units/hr.
    2. Concentration: 25,000 units ÷ 500 mL = 50 units/mL.
    3. 1,188 units/hr ÷ 50 units/mL
    4. = 23.76 mL/hr → rounded to 23.8 mL/hr
  6. Adult.

    Order: heparin 5,000 units SubQ every 8 hours

    On hand: heparin sodium 10,000 units/mL single-dose vial (1 mL).

    Heparin is a high-alert medication: many facilities require an independent double check.

    How many mL will you give? (Round to tenths (hundredths if under 1 mL).)

    Answer: ______ mL

    Show answer and worked solution

    Answer: 0.5 mL

    1. Desired (D) = 5000 units. Have (H) = 10000 units. Quantity (Q) = 1 mL.
    2. D ÷ H × Q = 5000 ÷ 10000 × 1 mL
    3. = 0.5 mL
  7. Adult.

    Order: heparin continuous IV infusion per provider order

    On hand: heparin sodium 25,000 units / 250 mL (100 units/mL) premixed IV bag in 5% dextrose (D5W) (250 mL bag).

    The pump is running at 11.5 mL/hr.

    How many units/hr is the patient receiving? (Round to a whole number of units.)

    Answer: ______ units/hr

    Show answer and worked solution

    Answer: 1,150 units/hr

    1. Concentration: 25,000 units ÷ 250 mL = 100 units/mL.
    2. units/hr = mL/hr × units/mL = 11.5 × 100
    3. = 1150 units/hr
  8. Adult, 66 kg.

    Order: heparin IV per weight-based heparin protocol (example protocol below)

    On hand: heparin sodium 25,000 units / 250 mL (100 units/mL) premixed IV bag in 5% dextrose (D5W) (250 mL bag).

    Example protocol for practice only — always follow your institution's protocol.

    Modelled on Raschke et al., Ann Intern Med 1993 (weight-based heparin nomogram).

    Protocol start: bolus 80 units/kg IV, then infusion 18 units/kg/hr.

    The infusion was started at 18 units/kg/hr. The 6-hour aPTT is 30 seconds.

    Example protocol for practice only — always follow your institution's protocol (modelled on Raschke et al., 1993)
    aPTT (seconds)Action
    Less than 35Re-bolus 80 units/kg; increase infusion by 4 units/kg/hr
    35 to 45Re-bolus 40 units/kg; increase infusion by 2 units/kg/hr
    46 to 70No change
    71 to 90Decrease infusion by 2 units/kg/hr
    More than 90Hold infusion 1 hour; then decrease by 3 units/kg/hr

    Using the table, at what rate (mL/hr) will the infusion run after this aPTT? (Round to tenths of a mL/hr.)

    Answer: ______ mL/hr

    Show answer and worked solution

    Answer: 14.5 mL/hr

    1. aPTT 30 seconds is in the "Less than 35" row: re-bolus 80 units/kg; increase infusion by 4 units/kg/hr.
    2. New dose = 18 + 4 = 22 units/kg/hr.
    3. 22 units/kg/hr × 66 kg = 1,452 units/hr.
    4. Concentration: 25,000 units ÷ 250 mL = 100 units/mL.
    5. 1,452 units/hr ÷ 100 units/mL
    6. = 14.52 mL/hr → rounded to 14.5 mL/hr
  9. Adult.

    Order: heparin 10,000 units SubQ every 8 hours

    On hand: heparin sodium 10,000 units/mL single-dose vial (1 mL).

    Heparin is a high-alert medication: many facilities require an independent double check.

    How many mL will you give? (Round to tenths (hundredths if under 1 mL).)

    Answer: ______ mL

    Show answer and worked solution

    Answer: 1 mL

    1. Desired (D) = 10000 units. Have (H) = 10000 units. Quantity (Q) = 1 mL.
    2. D ÷ H × Q = 10000 ÷ 10000 × 1 mL
    3. = 1 mL
  10. Adult.

    Order: heparin 950 units/hr IV continuous infusion

    On hand: heparin sodium 20,000 units / 500 mL (40 units/mL) premixed IV bag in 5% dextrose (D5W) (500 mL bag).

    At what rate (mL/hr) will you set the pump? (Round to tenths of a mL/hr.)

    Answer: ______ mL/hr

    Show answer and worked solution

    Answer: 23.8 mL/hr

    1. Concentration: 20,000 units ÷ 500 mL = 40 units/mL.
    2. mL/hr = ordered units/hr ÷ units/mL = 950 ÷ 40
    3. = 23.75 mL/hr → rounded to 23.8 mL/hr

Common mistakes

Want more? The app generates new numbers every time and explains the exact mistake when you get one wrong.

Practice unlimited questions free →

Frequently asked questions

How do you calculate a heparin drip rate?

Divide the ordered units per hour by the bag concentration in units per mL. With 100 units/mL, 1,200 units/hr runs at 12 mL/hr.

How do you convert mL/hr to units/hr?

Multiply the pump rate by the concentration: mL/hr × units/mL = units/hr.

Is the protocol on this page a real protocol?

No. It is an example protocol for practice only, modelled on Raschke 1993. Facility protocols differ; follow your own.

Why is heparin a high-alert medication?

ISMP lists heparin as a high-alert medication because errors can cause serious bleeding or clotting.

References

  1. Heparin sodium in 5% dextrose injection (premixed): FDA-approved prescribing information, DailyMed set ID 92a6f533-1a3d-4734-b413-d245592454e3 (U.S. National Library of Medicine).
  2. Heparin sodium in 0.9% sodium chloride injection (premixed): FDA-approved prescribing information, DailyMed set ID 8b030692-fc66-4c53-85aa-6f865e635618 (U.S. National Library of Medicine).
  3. U.S. Food and Drug Administration. National Drug Code (NDC) Directory, via openFDA (product strengths checked 2026-11-16).
  4. Raschke RA, et al. The weight-based heparin dosing nomogram compared with a "standard care" nomogram. Ann Intern Med. 1993;119(9):874-881.
  5. Institute for Safe Medication Practices (ISMP). ISMP List of High-Alert Medications in Acute Care Settings.
  6. Institute for Safe Medication Practices (ISMP). ISMP List of Error-Prone Abbreviations, Symbols, and Dose Designations (leading zeros, no trailing zeros).
  7. The Joint Commission. Official "Do Not Use" List of Abbreviations.
  8. Pickar GD, et al. Dosage Calculations. Cengage Learning (current edition).
  9. Burchum JR, Rosenthal LD. Lehne's Pharmacology for Nursing Care. Elsevier (current edition).

Educational practice only. These are simulated practice questions, not a clinical decision tool. Always follow the prescriber's order, a current drug reference and your facility's policies.