BSA Dosing with the Mosteller Formula
Quick answer: Body surface area (BSA) by the Mosteller formula is √(height in cm × weight in kg ÷ 3,600), in m². Then multiply the ordered dose by the BSA: mg/m² × m² = mg. A patient who is 175 cm and 80 kg has a BSA of √(14,000 ÷ 3,600) = 1.97 m², so 100 mg/m² is 197 mg.
The Mosteller BSA formula
Body surface area is an estimate of the outer surface of the body in square metres (m²). Several formulas exist; the one most taught in nursing and pharmacy programs is Mosteller's, published as a one-page letter in the New England Journal of Medicine in 1987 because it can be done with a basic calculator:
BSA (m²) = √( height (cm) × weight (kg) ÷ 3,600 )
Three steps:
- Multiply height in centimetres by weight in kilograms.
- Divide by 3,600.
- Take the square root, and round to two decimal places.
If height and weight are in inches and pounds, convert first: 1 inch = 2.54 cm exactly, and divide pounds by 2.2 (or 2.2046, if your program uses it) to get kilograms. The unit conversions guide covers both. Most adults fall between about 1.4 and 2.5 m²; an answer like 19.7 or 0.197 means a step has gone wrong.
Calculating BSA: worked examples
Example 1: metric
Patient: 175 cm, 80 kg.
175 × 80 = 14,000
14,000 ÷ 3,600 = 3.888…
√3.888… = 1.972… → 1.97 m²
Example 2: a smaller adult
Patient: 160 cm, 60 kg.
160 × 60 = 9,600
9,600 ÷ 3,600 = 2.666…
√2.666… = 1.632… → 1.63 m²
Example 3: starting from inches and pounds
Patient: 66 inches, 154 lb.
66 in × 2.54 = 167.64 cm
154 lb ÷ 2.2 = 70 kg
167.64 × 70 = 11,734.8
11,734.8 ÷ 3,600 = 3.2597
√3.2597 = 1.805… → 1.81 m²
Do not use the rounded BSA from the start; carry full precision until the square root, then round once.
From BSA to dose
Once you have the BSA, the dose is a single multiplication, exactly like a mg/kg dose but with m² instead of kg:
dose (mg) = ordered dose (mg/m²) × BSA (m²)
volume (mL) = dose (mg) ÷ concentration (mg/mL)
The second line is the ordinary D/H × Q step. In practice many BSA orders are for chemotherapy, which is prepared by pharmacy under strict hazardous-drug and double-check procedures. In exams and practice problems the BSA is often given on the order, and you are asked only for the dose or volume.
Dose examples (practice only)
These are calculation exercises, not dosing guidance. The mg/m² values come from the FDA labels and are used only to make the arithmetic realistic. Antineoplastic agents are ISMP high-alert medications; real orders are verified by pharmacy and checked independently.
Example 4: dose in mg
Order (practice): etoposide 100 mg/m²/day IV (one day of a multi-day course). BSA: 1.97 m².
100 mg/m² × 1.97 m² = 197 mg
Example 5: dose and volume
Order (practice): etoposide 100 mg/m²/day IV. BSA: 1.97 m². On hand: etoposide 20 mg/mL.
197 mg ÷ 20 mg/mL = 9.85 mL → 9.9 mL (to tenths)
This is the volume of concentrate drawn from the vial; the etoposide label requires further dilution before infusion.
Example 6: a different BSA and drug
Order (practice): CISplatin 50 mg/m² IV per cycle. BSA: 1.63 m² (Example 2). On hand: CISplatin 1 mg/mL.
50 × 1.63 = 81.5 mg
81.5 mg ÷ 1 mg/mL = 81.5 mL
Tall-man lettering (CISplatin) is used because cisplatin and carboplatin are look-alike names with very different doses. The cisplatin label also warns against confusing a daily dose with the total dose per cycle, so always read the time unit (per day or per cycle). Many institutions also have dose-rounding policies for chemotherapy; follow your own.
Checking a BSA answer
Because the square root compresses the numbers, BSA varies much less than weight. A 50 kg adult and a 100 kg adult of the same height differ in weight twofold but in BSA only by a factor of about 1.4 (the square root of 2). That gives you two quick checks before you trust a calculated value.
- Range check. Most adults are roughly 1.4 to 2.5 m². A result of 0.5 m² for an adult, or 4 m², points to a unit error (inches used as cm, pounds used as kg) or a skipped square root.
- Estimate check. For 175 cm and 80 kg, 175 × 80 is about 14,000, and 14,000 ÷ 3,600 is close to 4, whose square root is 2. An answer near 2 m² is plausible; 1.97 m² fits.
For the dose, the same logic applies: the milligram dose should be a little less than double the mg/m² figure for an average-sized adult, because the BSA is a little less than 2. If 100 mg/m² gives you 1,970 mg or 19.7 mg, the decimal has moved. BSA is also recalculated when weight changes significantly; how often is set by local policy, not by the formula.
Some calculators and textbooks use other BSA formulas, which give slightly different results for the same patient. Use the formula your program or institution specifies and do not mix them in one calculation. Exam questions almost always state which one to use, or give the BSA directly.
Common mistakes
- Using kg as m². 100 mg/m² × 80 kg = 8,000 mg is a 40-fold overdose. The dose multiplies the BSA, not the weight.
- Forgetting the square root. 3.89 is the value under the root, not the BSA.
- Mixing units in the formula. The 3,600 constant only works with cm and kg. Convert inches and pounds first.
- Rounding too early. Round the BSA once to hundredths, then calculate the dose.
- Picking the wrong vial strength. Some drugs come in more than one concentration; use the one on hand.
Whatever the dosing basis, the final check is the same as in the pediatric safe-dose guide: compare the calculated dose with the range the label allows before giving it. For dosing by weight alone, see weight-based dosing.
Frequently asked questions
What is the Mosteller formula for BSA?
BSA (m²) = √(height in cm × weight in kg ÷ 3,600). It was published by Mosteller in the New England Journal of Medicine in 1987 as a simple alternative to older formulas. For 175 cm and 80 kg: √(14,000 ÷ 3,600) = √3.889 = 1.97 m².
How do you calculate a dose from BSA?
Multiply the ordered dose per square metre by the BSA: mg/m² × m² = mg. An order of 100 mg/m² for a BSA of 1.97 m² is 197 mg. To get a volume, divide by the concentration in mg/mL.
How do you calculate BSA from inches and pounds?
Convert to metric first: inches × 2.54 = cm, and pounds ÷ 2.2 = kg. Then use the Mosteller formula. Converting first means you only need to remember one version of the formula.
Why are some drugs dosed by body surface area?
For many cytotoxic chemotherapy drugs, BSA was adopted because it was thought to track metabolic size better than weight alone. Labels for drugs such as cisplatin and etoposide give doses in mg/m².
How many decimal places should BSA have?
BSA is usually expressed to two decimal places (hundredths of a m²). Round the BSA once, then use the rounded value in the dose calculation, unless your program teaches otherwise.
Related guides
References
- Mosteller RD. Simplified calculation of body-surface area. N Engl J Med. 1987;317(17):1098. doi:10.1056/NEJM198710223171717.
- Etoposide injection 20 mg/mL: FDA-approved prescribing information, DailyMed set ID 0dddbe44-b4f4-431f-9011-8a54abbd4cbf (U.S. National Library of Medicine).
- Cisplatin injection 1 mg/mL: FDA-approved prescribing information, DailyMed set ID 00396546-6a80-4b9f-a5f8-c22c1d1bb173 (U.S. National Library of Medicine).
- U.S. Food and Drug Administration. National Drug Code (NDC) Directory, via openFDA (product strengths checked 2026-11-16).
- Institute for Safe Medication Practices (ISMP). ISMP List of High-Alert Medications in Acute Care Settings.
- Pickar GD, et al. Dosage Calculations. Cengage Learning (current edition).
- Kee JL, Marshall SM. Clinical Calculations: With Applications to General and Specialty Areas. Elsevier (current edition).
Educational practice only. These worked examples teach calculation skills. They are not dosing guidance. Always follow your institution's policies, current drug references and the prescriber's order.